Bedienungsanleitung Harman Kardon Omni 10 (Seite 43 von 50) (Englisch)

569418

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Using the Link Button

The Link button is used to switch between existing

audio streams on your network, or to switch to

the Aux-in source. If anyone is streaming audio

via Wi-Fi , Bluetooth®, or listening to audio via

the Aux-in connection on any other product on

the network, pressing the Link button will pull

the same audio content to this product. A long

press of the Link button for 3 seconds will enable

Party Mode, sending the same music to all the

products in your house.

The Link button LED is also where the system

status is indicated. The outer ring LED indicates

the audio input, while the inner slash LED indicates

the connection status.

When the outer ring is white it indicates that you

are listening to audio over the Wi-Fi streaming

source. When it is blue, you are listening to audio

over the Bluetooth® source. When it is green, you

are listening via the Aux-in source.

If the inner slash LED is white, the product is

indicating the current Wi-Fi connection status:

slow pulsing means it is in Wi-Fi setup mode; fast

pulsing means it is connecting to a Wi-Fi network;

and solid white means it’s connected to a Wi-Fi

network. When the slash LED is blue, the product

is indicating the current Bluetooth® connection

status: when it is pulsing slowly, the product is

disconnected from any Bluetooth® source devices;

fast pulsing means it is in Bluetooth® pairing

mode; and solid blue means it’s connected to a

Bluetooth® source device. If the inner slash LED is

amber, the product is in Standby mode.

OPERATING YOUR OMNI 10, OMNI 20, ADAPT

Upgrading your Product

From time to time, Harman Kardon releases

firmware updates to enable new features or

to resolve issues. It is recommended that you

periodically check for new firmware updates and

install them, if available.

To check the currently installed firmware version

of your product, go to the product settings page

in the Harman Kardon Controller app. To access

the settings page, select any room or product

from the right-hand sidebar. Select the same room

or product a second time to open the playback

control panel. On the left-hand side of the screen,

select the room or product name again to open

the settings page. Select the “i” icon on the top-

right of the screen. A list of products in this room

along with their current firmware versions will

be displayed.

If any updates are available, a small downward-

pointing arrow will be visible over the product

icons at the top of the ‘Settings’ page. If an

upgrade is available, tap the product icon. A

message will appear asking if you wish to upgrade

the product. Select yes, and the upgrade file will

be automatically downloaded from the internet

and the product will automatically upgrade. While

the product is upgrading, the Link button LED

will remain solid white. After the LED turns off

for several seconds, it will quickly flash on and off

indicating that the upgrade process is complete.

Repeat the process for all products in your Harman

Kardon HD Wireless Audio System.

IMPORTANT: Do not power off your product or

press any buttons during the upgrade process.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon Omni 10 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon Omni 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info