502828

Harman Kardon RCP2 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
PROGRAMMING THE REMOTE
3. Press the Input Selector e button chosen and
the
Learn Button at the same time. Hold
these buttons until the
Program/SPL Indica
tor
c flashes amber and the light under the device
selector button turns red. Release the buttons.
4.
Press the button on the RCP 2 that you wish to
program. The
Program/SPL Indicator c will
stop flashing.
5.
Within 5 seconds, press and hold the button on the
original remote that you wish to “teach” into the
RCP 2. When the Program/SPL Indicator c turns
green three times, release the button. The Program
Indicator will then begin to flash amber again.
NOTE: If the Program/SPL Indicator c turns
red during Step 4 or 5,
the programming was not
successful. Repeat the steps to see whether the
code will “take.”
6. Repeat Steps 4 and 5 for each button on the
source remote that you wish to transfer to the
RCP 2 remote.
7. Once all codes have been transferred from the
original source remote to the RCP 2, press the
Learn Button .
8. Repeat Steps 1 through 7 for any additional
remotes you wish to “teach” into the RCP 2.
Erasing Learned Codes
The RCP 2 allows you to remove or erase the code
learned into a single button for a single device, to
remove or erase the code set for all the codes that
have been programmed into specific device buttons
,
or to erase all commands that have been lear
ned
to all devices.
If you erase a code that is part of a macro, that macro
sequence will no longer operate properly.
T
o erase a single lear
ned code from within a single
device’s settings, follow these steps:
1. Press and hold both the
Input Selector ef
within which the individual button to be erased has
been programmed and the
Learn Button .
2.
When the red LED
under the
Input Selector tur
ns
red and the
Program/SPL Indicator c flashes
amber, release the buttons.
3. Press and release the
Input Selector ef
again for the device within which the individual
button to be erased has been programmed.
4. Press the
7 Button r four times.
5.
Press and release the individual button for which the
code is to be erased. The
Program/SPL Indicator
c will blink green twice and then retur
n to amber
.
6. To erase other buttons within the same device, press
them as described in Step 5.
7. When all buttons to be erased have been pressed,
press the
Learn Button to complete the
process.
To erase all codes within a single device, follow these
steps:
1. Press and hold both the
Input Selector ef
for which you wish to erase the codes and the
Learn Button .
2. When the red LED under the
Input Selector turns
red and the
Program/SPL Indicator c flashes
amber, release the buttons.
3. Press and release the
Input Selector ef
again for the device whose codes you wish to erase.
4. Press the
8 Button r four times.
5. The
Program/SPL Indicator c will turn off and
the red light under the
Input Selector will flash on
and off once to indicate that the codes have been
erased.
To erase all codes that have been programmed to all
devices in the remote, follow these steps:
1. Press any
Input Selector ef for which
you wish to erase the codes and also the
Learn
Button
.
2. When the red LED under the
Input Selector turns
red and the
Program/SPL Indicator c flashes
amber, release the buttons.
3. Press and release the
Input Selector ef
again for the device whose codes you wish to erase
.
4. Press the
9 Button r four times.
5. The
Program/SPL Indicator c will turn off and
the red light under the
Input Selector will flash on
and off once to indicate that the codes have been
erased.
Macro Programming
Macros enable you to easily repeat frequently used
combinations of commands with the press of a single
button on the RCP 2. Once programmed, a macro will
send out up to 19 different remote codes in a prede
-
termined sequential order, enabling you to automate
the process of turning on your system, changing
devices
,
or other common tasks. The RCP 2 can store
up to five separate macro command sequences: one
that is associated with the
P
o
wer On
Button
d and
four more that are accessed by pressing the
Macro
Buttons
.
1. Press the
Mute Button and the Macro
Button
to be programmed or the
Power On Button d at the same time.
An
Input Selector will light red, and the Program/
SPL Indicator
c will flash amber.
2. Enter the steps for the macro sequence by press-
ing the button for the actual command step.
Although the macro may contain up to 19 steps,
each button press
, including those used to change
devices, counts as a step. The
Program/SPL
Indicator
c will flash green to confirm each
button press as you enter commands.
NOTE: While entering commands for Power On/Off of
any device during a macro sequence, press the
Mute
Button
.
DO NOT press the actual Power button.
3. When all the steps have been entered, press the
Sleep Button j to enter the commands. The
red light under the
Input Selectors ef will
blink and then turn off.
Example: To program the Macro 1 button so that it
turns on the AVR, TV and a cable box, follow these
steps:
• Press the
Macro 1 Button and Mute
Button
at the same time and then release
them.
• Note that the
Program/SPL Indicator c will
flash amber.
• Press the
AVR
Selector
f.
• Press the
Mute Button to store the AVR’s
power on command.
• Press the
VID 3 Input Selector Button e to
indicate the next command is for “TV Power On.”
• Press the
Mute
Button
to store the
TV
Power On Command.
• Press the
VID 2 Input Selector
Button
e to
indicate the next command is for “Cable Power On.”
• Press the Mute Button to store the Cable
P
ower On command.
• Press the
Sleep/Channel Up
Button
j to
complete the process and store the macro
sequence.
After following these steps, each time you press
the
Macro 1
Button
the remote will send
the Power On/Off command.
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
33
34
35
36
37
38
39
40
41
48
49
46
47
44
45
42
43
38
39
40
41
31
32
30
28
29
25
26
27
28
29
30
24
23
22
21
20
31
37
36
35
34
33
32
31
37
36
35
34
33
32
48
49
50
51
47
46
45
44
43
42
8 PROGRAMMING THE REMOTE
RCP 2 Remote OM 10/4/04 4:38 PM Page 10
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon RCP2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info