Bedienungsanleitung Harman Kardon SB 16 (Seite 9 von 14) (Englisch)

769912

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Operation

SB 16

Operation

Set the soundbar’s and subwoofer’s Power switches in their On positions.

Turning the Soundbar On and Off

Manually: To turn the soundbar on manually, momentarily press the soundbar’s Power

button.

To put the soundbar into Standby manually, hold the Power button for at least three

seconds.

NOTE: If you put the soundbar into Standby manually, you can turn it back on only

by manually pressing the Power button again.

Auto turn-on: The soundbar has a signal detector that will automatically turn the unit on

when it senses an audio signal at any of its inputs. To minimize power consumption, the

signal detector is not activated unless the soundbar ﬁrst senses any kind of IR remote

signal. This does not have to be a remote code that has been learned by the soundbar

(see Programming the Soundbar to Respond to Your TV Remote, on page 11) – turning

your TV on or changing its volume via its remote will be enough.

Once the soundbar’s signal detector has been activated, the unit will automatically turn

from Standby to On as soon as it detects an input signal at any of its Source input

connections.

Auto turn-off: The soundbar will automatically enter the Standby mode if no audio signal

is detected at any of its Source input connections for approximately 15 minutes. If you

have programmed the soundbar to respond to your TV remote’s on and off commands,

you can manually put the soundbar into the Standby mode without having to hold its

Power button for three seconds. See Programming the Soundbar to Respond to Your TV

Remote, on page 11.

If you will be away from home for an extended period of time, or if you will not be using

the system for an extended period, set the soundbar’s Power switch to Off.

Turning the Subwoofer On and Off

The subwoofer will automatically turn itself on when it receives an audio signal, and it

will return to the Standby mode when it has received no audio signal for 15 minutes. The

subwoofer’s LED will turn blue when the subwoofer is on, and will turn amber when the

subwoofer is in Standby.

If you will be away from home for an extended period of time, or if you will not be using

the system for an extended period, set the subwoofer’s Power switch to the Off position.

Adjusting the System’s Volume

Press the soundbar’s Volume Up and Down buttons to raise and lower the system’s volume

one step at a time. Hold down the buttons to raise or lower the volume continuously.

NOTE: The lowest setting of the Volume Down button will mute the system.

If the system will not play loud enough or quiet enough, adjust the Trim Switch (see

Soundbar Trim Switch, on page 10).

For the best sound, we recommend turning your TV’s built-in speakers off. Consult your

TV’s owner’s manual to ﬁnd out how to do this. If there is no way to turn your TV’s

speakers off, you can adjust the TV’s volume so that your SB 16 system will always

supply most of the sound:

1. Using the volume buttons on your TV, turn its volume all the way down.

2. Then use the soundbar’s Volume Up/Down buttons to set the sound to a comfortable

listening level.

This way, your SB 16 system should always be louder than your TV’s speakers. NOTE:

This may reduce the volume of your TV’s output connection, so you may have to set the

soundbar’s Trim Switch to position 3 to compensate. See Soundbar Trim Switch, on page 10.

Muting the System

Momentarily press the soundbar’s Power button to mute the system. (The Power Indicator

ﬂashes blue.) Momentarily press the Power button again to un-mute the system. (The

Power Indicator turns to a steady blue.)

Soundbar Surround Mode Button

This button switches the sound between normal stereo (the Surround Mode Indicator

turns white) and 3D Surround (the Surround Mode Indicator turns blue). The 3D Surround

setting will produce a complete surround-sound experience for anyone sitting in front

of and several feet away from the soundbar. Although it is particularly effective when

watching movies, you can also try the 3D Surround setting for music.

Soundbar SRC (Source) Button

Each press of this button switches the soundbar’s audio source between the optical

digital connection, the coaxial digital connection and the analog connections.

Position

Standby

Position

Power

Switch

Power

Switch

Power Button

Surround Mode Button

Source Button

Volume Buttons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon SB 16 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info