Bedienungsanleitung Harman Kardon SB26 (Seite 10 von 15) (Englisch)

534567

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

SB26

Operation

• Dolby® Digital: If a Dolby Digital audio stream is sensed by the soundbar,

the OSD will indicate that the Dolby Digital decoding is active.

• Bluetooth: The following information is displayed in the OSD during

Bluetooth operation:

• Bluetooth pairing - When the SB26 is in pairing mode

• Bluetooth connected - When the connection to a new device is

successful

• Bluetooth - When the source Bluetooth is operated

In addition to the status information, the OSD will also display messages if the selected

HDMI connection cannot be detected or if the video signal is lost.

Operating through Bluetooth®

To wirelessly stream audio to the SB26 from a Bluetooth-enabled device:

1. Confirm that the SB26 is in the Bluetooth pairing mode (the Bluetooth

button LED will be flashing blue). If the LED is not flashing blue, press and

hold the Bluetooth button until its LED starts flashing blue.

The OSD will display Bluetooth pairing.

2. Place the device in the pairing mode.

3. Use the device’s Bluetooth pairing menu to pair it with the SB26. The

system will appear as SB26 in the list of Bluetooth available devices. When

the SB26’s Bluetooth button LED illuminates constantly, it is paired with the

device and you can stream audio via Bluetooth from the device to the SB26.

The OSD will display Bluetooth connected.

To listen to audio from the Bluetooth device, press the Bluetooth source button on the

SB26 to activate the source. If the SB26 is in Standby mode, you can automatically wake

up the system by starting to stream an audio Bluetooth signal to the SB26 as long as

your device has already been paired with the SB26. The OSD will display Bluetooth.

To disconnect the Bluetooth device, press and hold the SB26’s Bluetooth button until

the LED begins flashing. The OSD will display Bluetooth pairing.

NOTE:

• You can manually switch sources to the paired Bluetooth device by

pressing the SB26’s Bluetooth button.

• If you switch the SB26 to a different source while a paired

Bluetooth device is streaming to the system, the SB26 will send a

STOP command and the Bluetooth device will stop streaming.

• While pairing the Bluetooth device for the first time, it may reset

the volume level to maximum.

Switching Sources

The remote has individual selector buttons for each source except Bluetooth. The active

source’s Source Indicator LED will illuminate upon selection.

Adjusting the System’s Volume

Soundbar

Press the SB26’s Volume Up and Down buttons on the remote control or on the soundbar

to raise and lower the system’s volume, one press at a time. Hold down the button to

raise or lower the volume continuously.

NOTE: The lowest setting of the Volume Down button will mute the system.

For the best sound, we recommend turning your TV’s built-in speakers off. Consult

your TV’s owner’s manual to find out how to do this. If there is no way to turn your TV’s

speakers off, you can adjust the TV’s volume so that your SB26 system will always supply

most of the sound:

1. Using the volume buttons on your TV, turn its volume all the way down.

2. Use the SB26’s Volume Up/Down buttons to set the sound to a comfortable

listening level.

This way, your SB26 system should always be louder than your TV speakers.

NOTE: If you play the SB26 at more than 50% of max volume and turn the

SB26 off using the Power button, the system will automatically reset at 50%

of the max volume.

Subwoofer

Press the remote control subwoofer volume up and down to raise and lower the system’s

subwoofer volume.

Subwoofer Volume Control

Use the subwoofer’s volume control to balance the bass with the rest of the sound. Play

music or movies that you are familiar with and adjust the subwoofer’s Volume knob

so the bass sounds are balanced on both music and films. Listen to several different

music recordings and film soundtracks that contain strong bass, and find a setting for

the Volume knob that does not over-emphasize the bass or make it sound weak.

Bluetooth

Volume

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon SB26 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon SB26

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info