Bedienungsanleitung Harman Kardon tc 30 (Seite 5 von 19) (Englisch)

122795

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

0 USB Connector: Push down on the rubber cover to access the USB connecter. To program the TC 30 from our Web site, connect the

upplied USB cable here, and then to your computer.

1 IR Emitter Window: Point this end of the remote toward the devices being controlled.

2 P

ower Button:

ress this button to turn a Device off.

3 Activities Button: Press this button to view the list of Activities programmed into your TC 30. Press the Screen Button next to an

ctivity to select it and turn on the Devices in that Activity.

4 Devices Button: Press this button to display a list of all the devices programmed in your TC 30. To control the Device, press the Screen

Button next to the desired device’s name.

5 Help Button: If you are having problems with an Activity, press this button for interactive help screens that will resolve issues with syn-

chronizing the status of the components in your system.

6 Screen Buttons:

Press the buttons at either side of the LCD screen to select the Activity, Device or command shown next to the button.

7 LCD Screen: The LCD screen displays system messages, Help screens and the functions assigned to the Screen Buttons 6,

depending on the remote’s current status.

8 Page Left/Right Buttons: Press these buttons to show additional screen display pages for a Device, activity or setup function.

9 Transport Control Buttons: Press these buttons to control the transport functions (Stop/Skip Back/Skip Forward/Play/Record/Fast

Reverse/Fast Forward/Pause) for Devices such as DVD or CD players, digital recorders and VCRs when they are active.

A Device Control Buttons: These buttons directly control functions of the currently active Device. The names on the individual button

names are the typical function, but the actual function will vary with the device.

B Mute Button: Press this button to activate the Mute function of the Device being controlled.

C Volume Controls: Press these buttons to change the volume of the Device being controlled.

D Navigation Buttons: The function of these “up/down/left/right” buttons varies according to the Device being controlled.

E OK/Enter Button: This button is normally the “Enter” or “Select” function for the Device being controlled, but its function will vary

according to the Device being controlled.

F Glow Button: Press this button to illuminate the LCD screen and the button backlighting. The backlighting will also come on when any

button is pushed. You may change the setting for the length of time the lighting is on via the TC 30 Web site (see page 9). The backlighting

will also turn on automatically any time you move the remote, thanks to a built-in “tilt sensor.” You may disable the “tilt-on” function in the

Remote Options section of the TC 30 Web site.

G Channel Up/Down: Press these buttons to change the channel or station of the device being controlled.

H Numeric Keys: These buttons enter numeric values for the device being controlled.

I Infrared Learning Port: When “learning” commands from a Device’s remote into the TC 30, point the IR transmitter on the remote

being “learned” here.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon tc 30 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info