Bedienungsanleitung Harman Kardon tc 30 (Seite 15 von 19) (Englisch)

122795

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

• To change the name of an existing Device, select Rename and follow the instructions that appear.

• To adjust the settings for the way in which inputs are selected, select Adjust Inputs and follow the instructions that appear. This setting

ill not always be shown, as some devices do not have multiple inputs.

• To adjust the way in which power on/off commands are sent to a device, select Adjust Power Settings and follow the instructions that

appear.

• Certain devices require you to fine-tune the speed at which remote commands are sent from a remote to the device, or to otherwise

change the timing parameters of remote commands. If a device does not work properly with your TC 30, incorrect command speed/delay

settings may be involved, and you may adjust those settings for proper operation by selecting Adjust the Delays and following the

instructions that appear. NOTE: Before changing these settings you may wish to write down the initial delay times, as incorrect adjustment

of these settings may cause incorrect operation of a Device.

• To change the way in which the TC 30 simulates the operation of a device’s original remote, or to customize the appearance of “buttons”

on the TC 30’s LCD screen, select

Customize Device Commands and follow the steps that appear.

• Since many brands use different remote commands for similar device types, it is possible that your TC 30 may be programmed with the

correct brand name, but with commands that are not appropriate for the specific device you wish to control. If a device does not appear

to be responding properly to commands sent by the TC 30, you may check that the commands are correct by selecting Confirm Infrared

Commands and following the steps that appear. Note that you will need the original remote control from the product in order to complete

this process.

• Although the TC 30’s remote code data base is among the most complete, it is possible that a secondary command from the original

remote is not available. You may program any missing codes for a device into your TC 30 by selecting

Learn Infrared Commands and

following the steps that appear. Note that you will need the original remote control from the product in order to complete this process.

• If you wish to clear all commands and settings for a specific device from your TC 30 and start the setup process for a device from the

beginning, select

Redo Setup and follow the steps that appear.

• If the TC 30 is not controlling a Device properly, click on

Advanced Settings and use the options there to fine-tune the TC 30’s perform-

ance. The settings here are for advanced users and are not required for most systems.

• If you are having trouble with the way in which a device operates with the TC 30, select

Troubleshoot and use the options that appear to

solve the problem.

• To delete an existing Device, click on Remove This Device and follow the instructions that appear.

• In some cases, you may have more than one device of the same type in your system. To simplify setup by patterning the way the TC 30

controls a new device based on the way you ha

ve alread

y established the settings for another product,

select

Set Up This Device Based

on a Similar Device and follow the instructions that appear.

Remote Preferences

The options in this area allo

w you to change the

TC 30’

s settings to customize the look of the LCD screen. Within this area of the TC 30 Web

site are the following ways to change the way your TC 30 looks and operates:

•

Click on

Settings to change the way in which the

TC 30 operates so that it suits your preferences in the following areas:

■ Turning the Remote Assistant on or off.

■ Setting the on-screen Help System to Smart or Full mode.

■ Setting the timing for the backlight to maximize battery life or accommodate a room that is normally dark.

■ Setting the forma

t for the time display

■ Showing or hiding the “Starting Activity” message.

■ Turning the tilt sensor on or off to control whether the backlighting is illuminated or not when the remote is moved.

■ Click on Customize Device Commands to rename a button, to assign a Device function to a different button on the TC 30 than

the one used by the default settings, or to learn commands from a Device’s remote that are not in the TC 30 code library.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon tc 30 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info