Bedienungsanleitung Hartke Kilo (Seite 6 von 96) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

624011

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Introduction

Congratulations on the purchase of your new Hartke Kilo Bass Amplier! We know you

don’t like reading owner’s manuals, but we suggest you take some time to go through

these pages (we’ll make it as painless as possible, we promise) to fully understand how

we’ve implemented a number of unique features.

The Hartke Kilo raises the standard for bass amplication. It provides 500 watts at 2

ohms of power per side in stereo mode, and a massive 1,000 watts at 4 ohms in the

bridged mono mode. To sculpt your sound, the Kilo has an all-tube class-A preamp,

and logically arranged tone controls. The Kilo oers a classic tone stack three-band EQ,

with Hartke’s variable Shape circuit. For additional tone shaping, there is a 10-band

Graphic Equalizer, as well as selectable Deep and Brite EQ curves. To add some “dirt” to

your sound, there is a variable tube Overdrive circuit, and to round out the dynamics,

there is a fast and articulate Compressor circuit.

To connect your amplier to speaker cabinets, the Kilo has both ¼” and Speakon®

output jacks. The Kilo also provides an abundance of connections and signal routing

features, including multi-point direct output switching, stereo Eects Loop, front and

rear panel tuner outputs, and footswitch jacks to remotely control the Mute, Overdrive,

EFX send, and Graphic EQ functions.

You’ll nd the Kilo to be an ideal choice for every situation—from recording studios, to

small clubs, to giant stadiums. In this manual, you’ll nd a detailed description of the

features of your Hartke Kilo bass amplier, as well as step-by-step instructions for its

setup and use, and full specications.

If your Kilo was purchased in the United States you’ll also nd a warranty card

enclosed. Don’t forget to ll it out and mail it! This will enable you to receive online

technical support, and allow us to send you updated information about this and other

Samson products. With proper care, your Kilo will operate trouble-free for many years.

We recommend you record your serial number in the space provided below for future

reference.

Serial number: _______________________________

Date of purchase: _______________________________

Should your unit ever require servicing, a Return Authorization (RA) number must

be obtained before shipping your unit to Samson. Without this number, the unit will

not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for an RA

number prior to shipping your unit. Please retain the original packing materials and, if

possible, return the unit in its original carton. If your Kilo was purchased outside of the

United States, contact your local distributor for warranty details and service informa-

tion. Also, be sure to check out our website (www.samsontech.com) for information

about our full product line.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hartke Kilo Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info