Bedienungsanleitung Hayward AquaVac 650 (Seite 17 von 98) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

801917

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

CAUTION - RISK OF EQUIPMENT DAMAGE

The cleaner is not intended to clean the pool after extended

periods of disuse until the following steps have been taken:

1. Clear the pool of any large objects that might interfere

with the cleaner’s operation.

2. Check to see that the water is at the recommended level.

3. Check the water chemistry. The water should be

properly balanced (pH level), and the pool free from

algae. Algae can adversely affect the operation and

performance of the cleaner.

4. Clean or backwash the ltration system without the

cleaner in the pool.

NEW POOL CONSTRUCTION

POOL PREPARATION

POOLS WITH EXCESSIVE DEBRIS

• The cleaner should not be used to remove plaster dust or

construction debris from new or renovated pools.

• Brush the newly constructed pool surface and vacuum new

surface debris before installing the cleaner.

• The cleaner should not be used to remove excessive debris

before a seasonal pool opening or following a high wind

event or sandstorm.

• Pools with excessive amounts of debris should be

vacuumed manually before using the cleaner.

• Always empty the cleaner lter cartridges or debris canister

when lled with debris.

Pool Preparation

• NEVER SWIM WITH THE CLEANER IN THE POOL.

• Before using the cleaner, remove any items such as

thermometers, toys and other accessories from the pool.

Such items may cause damage to the cleaner or the pool.

Large debris should also be removed manually from

the pool before installing the cleaner.

• Chemical balance of water may affect cleaner performance,

accelerate wear of certain parts, and may lead to more

frequent maintenance.

• DO NOT LEAVE THE CLEANER IN THE POOL WHEN

CHEMICAL SHOCKING THE POOL.

• pH should be adjusted and kept between 7.2 – 7.8.

• Free chlorine should be maintained between 1.0 – 3.0 PPM.

The cleaner should never be used when chlorine level

(or other oxidizer) exceeds the normal values.

• Total alkalinity level should always be maintained

between 80 – 150 PPM.

• To keep the pool safe for swimming and protect your

equipment, have the water tested frequently and balance

chemicals accordingly.

pH: 7.2 - 7.8

Cl: 1.0-3.0 PPM

TAC: 80 - 120 PPM

50˚- 100˚F

10˚- 37˚C

>3.0 PPM

NORMAL DEBRIS PICK-UP

• The SpinTech™ canister is intended to collect most visible

debris by using a selective debris separation system.

• The cleaner is equipped with clog-free, lter-free, and

TouchFree™ debris handling with advanced pick-up capability;

it is not intended to lter very ne particles.

• When ne particles or algae are present in the pool, they will

be put back in suspension to be captured by the pool ltration

system. It is normal to observe some ne dust coming out of

the cleaner when very ne debris load is present.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hayward AquaVac 650 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info