Bedienungsanleitung Hayward Pool Vac series Navigator (Seite 5 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

801938

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Remove the vacuum gauge from the hose and keep

it within easy reach. You will need it from time to

time to check the operation of the cleaner.

Step 8. Observe the cleaner in operation. The dis-

charge of water into the pool may affect the cleaner,

either at the hose on the surface or with the cleaner

itself at the bottom of the pool. If the pool’s dis-

charge can swivel, turn it so the flow of water does

not interfere with the movements of the cleaner.

Otherwise, ask your dealer to help find a solution.

Step 9. Check that the cleaner moves without stop-

ping too long at steps and other obstacles (vertical

walls, ladders). If it seems to you that the cleaner

is stuck, set the rear flap adjustment knob to I (see

figure 3).

Step 10. The cleaner climbs the vertical walls of

cement and fiberglass pools provided that they join

the pool bottom in a smooth curve (radius at least

30 cm). When the cleaner climbs a wall, It may

stop short of the top. If the cleaner seems not to

grip the wall, set the rear flap adjustment knob to

III (see figure 3).

If the cleaner reaches the water surface and takes

in air, set the rear flap adjustment knob to I (see

figure 3). If the cleaner still climbs too high, reduce

the suction power by 25 mm (1’’) until operation

becomes normal.

About 80% of pool residues are on the bottom, the

remaining 20 % on the walls, so the cleaner spends

more time cleaning the bottom than the walls.

Because of the shape of most sunken liner pools

(corners too sharp), the cleaner is confined to the

bottom (whatever the depth) and sloping walls. The

cleaner does not climb vertical liner walls.

Now that your cleaner is installed and working prop-

erly, enjoys your pool.

IMPORTANT RECOMMENDATIONS

1. Check regularly that the hose of the cleaner

is properly connected to the skimmer suction

port.

2. Disconnect the hose of the cleaner beforeback-

washing the filter. This is to ensure the flow of

water needed for effective back-washing.

3. Never coil the hose of the cleaner. The war-

ranty does not cover problems caused by

coiled hoses.

4. Warning: If massive chlorination is applied, it

is essential to remove the cleaner and its hose

from the pool until the chlorine level returns to

normal.

5. Always disconnect the main hoses from the

cleaner head when the latter is not in the pool.

6. Always carry and lift the cleaner by its handle,

never by the hose.

7. Remove the cleaner and its hose from the pool

before using the pool.

8. Check the vacuum regularly using the vacuum

gauge. Too much or too little suction is harmful.

9. Keep the back grate clean and free of debris by

regular brushing.

MAINTENANCE TIPS

The cleaner has a «removable bottom». The pur-

pose of this feature is readier access to the turbine/

suction chamber unit for servicing or cleaning.

Should the cleaner stop or slow down too much

because of the build-up of residues in the neck or

inside the device, you can reach the turbine/suction

chamber unit (see figure 11).

DISCLAIMER

1. Ageing, sunlight, and chemical treatments

damage the liner.

2. The liner may be weakened and become brittle.

3. The pool’s installation and environment may

also affect the liner.

4. When you install your cleaner, you take com-

plete responsibility for the condition of your pool

and its environment.

Important: Remove the AEV096 vacuum gauge

after adjusting the cleaner. It is not designed to

be left in the water and is not covered by the

warranty.

Remark: Bear these points in mind when install-

ing your cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hayward Pool Vac series Navigator Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info