Bedienungsanleitung Hayward PoolVac V-FLEX Cleaner (Seite 6 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

801939

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

LIST OF POSSIBLE PROBLEMS

WARRANTY CONDITIONS

This product is warranted to be free from detects in material and workmanship for (5) five years from the

date of purchase. All warranty claims would be including the proof of purchase indicating the date. We

invite you to keep your receipt.

Hayward warranty is limited to the replacement or repair, at our option, of defective products that have

been used in normal conditions and accordingly to the instruction leaflet, with no change in the product

and that have been working only with genuine Hayward parts. Frost and chemical reaction damages are

excluded of the warranty.

Hayward will not be responsible for all other costs (removal, labour reinstallation...), neither direct nor

indirect damages caused by malfunction of the defective product.

The limited warranty excludes the following motion devices: hoses, shoes, wings, flaps, bearings and pads.

To initiate a warranty claim and ask for repair or replacement of a product, please contact your dealer. No

shipment to our factory will be accepted without our preliminary written acceptance.

PROBLEM CAUSE SOLUTION

The cleaner is slow or doesn’t move. Not enough flow through the cleaner. Clean the leaf trap. the prefilter and the filtration

system. Check the vacuum with the vacuum

gauge.

Partial blockage of the suction opening of

the cleaner.

Clear the blocked opening.

Pads worm. Replace the pads (figure 8).

Wings worn Replace the wings (figures 9 and 10).

The cleaner stops at walls, steps, the lad-

der, etc.

Suction too weak. Check the vacuum with the vacuum gauge.

Pads or wings worn. Replace the pads (figure 8) or wings (fig 9. 10).

Hose too short. Add lengths as explained In the directions for use.

Failure of steering system. Check and clean the back grate. Check

that the cone transmission mechanism turns

freely in both directions. Check and neces-

sary replace the guidance system.

The cleaner tails to climb the vertical walls of

a cement or gunite pool.

Not enough flow through the cleaner. Clean the leaf trap, the prefilter, and the

filtration system. Check the vacuum with the

vacuum gauge.

Partial blockage of the suction opening of

the cleaner

Clear the blocked opening.

Pads worn. Replace the pads (figure 8).

Wings worn. Replace the wings (figures 9 and 10).

Hose too short. Add lengths as explained In the directions for use.

Wrong rear flap tension. Set the rear flap adjustment knob to III (figure 3).

The cleaner reaches the surface and takes

in air

Too much flow through the cleaner. Clean the leaf trap, the prefilter, and the

filtration system. Check the vacuum with the

vacuum gauge.

Wrong rear flap tension. Set the rear flap adjustment knob to I (figure 3).

Failure of steering system. Check and clean the back grate. Check that

the cone transmission mechanism turns freely

in both directions. Check and if necessary

replace the guidance system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hayward PoolVac V-FLEX Cleaner Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info