Bedienungsanleitung Heatstrip Design THD2400 (Seite 23 von 26) (Englisch)

721487

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Wall Controller with Remote Control

This controller is a custom designed and manufactured

controller for HEATSTRIP

. It has been designed for ease

of use to ensure economic running costs of your heater. It

provides a timer for automatic heater operation.

The timer function has four settings. It can turn the heater

on for 1 hour, 2 hours, 4 hours or constantly on.

The timer can be operated where it is installed or via

remote control unit. It has pre set timing for 1 hour, 2 hours

or hours or continuous, allowing the heater to operate

continuously.

The remote control has a range of 10 metres and must be

within line of sight of the wall switch.

Controlling multiple units

It is possible to use one wall controller to control multiple heaters up to 16 Amps load. The wall controller is rated at 16

Amps and 220-240 volts. For larger current draw, it is recommended that you talk to your electrician who can use a

relay to connect more units.

Mounting

The TT-MTR is designed to fit into a standard European wall gangbox. It will just as easily fit into a plaster wall. Your

electrician can install this device.

The controller needs to be installed according to your local wiring guidelines.

Operation

Press “ON/OFF” button to turn power on and off.

Press “TIMER” button to set timer to 1, 2, 4 hours operation. The timer indicator light will show which time setting is

selected. The timer will start the heater and automatically turn it off at the preselected time.

Safety

The TT-MTR controller must be installed in a dry location. It is not suitable for installation where rain or water could

affect the unit..

Ensure the connections are properly connected.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or intellectual

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play

with the appliance.

Maintenance

The TT-MTR Controller is made from durable materials, however regular care and maintenance of your controller will

help prolong the life of the product.

It is recommended that you dust the controller to keep the surface clean. The cleaning process at least every three

months will reduce the amount of build up and keep it looking as best it can.

Do not use any abrasive materials or products to clean the controller, this includes solvents, citrus based cleaners or

other harsh cleaning products. Do not use water or a damp cloth to clean the controller.

When handling the controller, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark

the surface of the controller.

MODEL MAXIMUM

VOLTAGE (Volts)

MAXIMUM

CURRENT (Amps)

PACKAGED

DIMENSIONS (mm)

WEIGHT (kg)

TT-MTR 220—240 16 80 x 80 x 42 0.5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Heatstrip Design THD2400 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Heatstrip Design THD2400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info