Bedienungsanleitung Hendi 203125 (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741514

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Operation

• The griddle is designed for frying meat, ﬁsh, veg-

etables, eggs, etc. The temperature can be ad-

justed between 50 °C and 300 °C.

• First, ensure there is enough clearance around

the appliance. Place the appliance in a well-ven-

tilated area and ﬁrm and level surface.

• Next, place the dripping tray (2) on the appliance.

• After that, connect the power plug to a suitable

electrical wall outlet.

• Then, switch ON the appliance by pressing the

power switch (1). Set the temperature control

knob (5) to your desired temperature. (Temper-

ature range 50°C to 300°C). The orange heating

indicator (4) will light up.

• When the set temperature is reached, the orange

heating indicator (4) will go out.

• Now, you can start frying the food.

Caution! Risk of burns!

• To remove the food, use the turner (not supplied),

make sure not to touch the surface of griddle

plate (3) and damage the surface.

• After use, switch OFF the appliance by pressing

the power switch (1) to OFF position.

• Disconnect the power cord from the electrical

power outlet.

• Allow the appliance completely cool down be-

fore cleaning and storage (See == > Cleaning and

Maintenance).

Note:

• Do not put too much food at one time for even

spacing and cooking.

• The appliance reaches the highest temperature

at the centre. The temperature is lower at the

front and side part. You can allow fried food for

temporarily placed.

RESET the Hi-limiter (thermal cut-out)

Please note that the RESET button is located at the

rear side of the appliance with a protective cap (See

line drawing)

• Unplug the appliance from the electrical outlet

ﬁrst.

• Allow the appliance to completely cool down.

• Unscrew the black protective cap of the RESET

button.

• Press the RESET button of the Hi-limiter (ther-

mal cut-out). You should hear a click sound.

• Screw back the protective cap on the RESET but-

ton.

Cleaning and Maintenance

WARNING! Always disconnect the appliance from

the electrical power supply and allow the appliance

completely cool down before cleaning.

• Never use abrasive sponges or aggressive deter-

gents, steel wool or metallic utensils to clean the

griddle plate.

• Avoid the use of sprays as this may damage the

griddle plate.

• Never immerse the appliance in water or any oth-

er liquid.

• This appliance should be cleaned regularly and

any food deposit removed.

• Wipe out any remaining oil or fat.

• Clean the surface of the griddle with a damp cloth

(water with mild detergent).

Storage

• Always make sure the appliance has already

been disconnected from the electrical wall outlet

and cooled down completely.

• Store the appliance in a cool and clean place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 203125 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info