Bedienungsanleitung Hendi 226209 (Seite 6 von 17) (Englisch)

741083

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

01 WARNINGS

01.01 Safety principle e cautions for a safety work

1. Before turning on the machine, and every time a doubt about its workings

should arise, every operator is obliged to carefully read the instructions for

use. Remember: using a machine you run a risk. Ensure that the people con-

cerned know and adhere to the contents of the manual.

2. Use the Machine indoor only.

3. Be careful, before start every work.

4. Work only with all safety and protective devices expected present and effi-

cient. Avoid to draw the hands near the moving parts.

5. It is absolutely forbidden to neutralise, remove, modify or in any other way

render inefficient, any part of the safety devices, protective devices, or con-

trols of the machine, wherever positioned. All the protective and safety devic-

es must be kept in perfect condition and working order.

6. Before turning on the machine, be sure that nobody is in the risk area.

7. During work cycle, operator must stand out the risk area.

8. During work cycle, do not leave the machine unattended.

9. Never work different materials, as quantity, quality and type, from how de-

script at point 02.01.

10. It is absolutely forbidden use the machine differently from how descript at

point 02.01.

11. Stop the Machine before cleaning an before removing any safety and protec-

tive device for maintenance.

12. During phases of research or removal of any cause of damage or inconven-

ience concerning the machine, take all necessary measures to prevent any

damage to people or things. remove the electric tension (separation of the

machine from the electric network) before approaching the protective devices.

13. At the end of any intervention that requires the removal or the neutralisation of

any component correlated to safety (barriers, sensors, protections, etc.), carry

out the putting back into operation, ensuring the correct position and effec-

tiveness.

14. Do not let unauthorized and unqualified personnel start, set and repair the

machine. Refer to this manual for the right operations.

15. The user power-supply main line should be equipped with safety devices by a

differential switch, automatically disconnecting, above the Machine, and with

an earth installation suitable for accident prevention standard.

16. Control main switches or nearly when the machine is turned off and un-

plugged. Authorized and qualified personnel only, must execute controls and

maintenance activities that need to remove of safety devices.

17. Pay attention to the indication of the identification plates existing on the ma-

chine.

18. All the identification plates, present, must be legible.

19. If machine does not work or components are damaged, contact the mainte-

nance-man, without proceed in further repairs.

20. Do not repair the machine hastily or incompletely. This can compromise the

good work of the machine.

21. Do not tamper the machine. The manufacturer disclaims all responsibility and

make the user liable toward accident prevention competent body.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 226209 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hendi 226209

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info