Bedienungsanleitung Hendi 282274 (Seite 13 von 164) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741096

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Check the integrity:

• of the ﬁxed protections,

• of the loading hopper,

• of the machine neck,

• of the machine body

All ﬁxed protections, etc.., must perform the function for

which have been foreseen.

Indicated parts sight check to verify their integrity in their

surface external part.

The parts must be however changed at the ﬁrst erosion

signals or breaking.

Check the functionality:

• of the control system parts / safety control;

• of the control devices.

All devices must perform the function for which have

been foreseen. Control directly the devices so that these

ones determine the waiting function.

The actuators and all parts must be however changed to

the ﬁrst erosion signals or breaking.

Check the absence:

• of strange noises after the starting

During the functionality checking of the control devices,

if there are strange noises, due for example to a seizing

or mechanical breaks, stop immediately the machine

and activate the maintenance service.

Check the absence:

• of oil trails both on the machine support ground both

in the Archimedean screw

Both during the working, both at the end of every work,

both in the assembly moment of the grinding group,

check the oil trails absence in the indicated parts. If

there are some ﬂuid drops stop immediately the

machine and activate the maintenance service.

For any intervention type or for the parts change

that are damaged, activate the maintenance ser-

vice. The possible change must happen with man-

ufacturer original products or at least of quality,

safety and equivalent characteristics. For analysis

contact the Authorized Assistance Center.

Put in function

The machine operator can put in function the ma-

chine following in order the under reported indica-

tions:

• Controls positive result for the preparation pre-

liminary operations,

• Controls positive result for the electric feeding,

• Controls positive for the hopper inserting and

positioning

• Checks positive result for the grinding group as-

sembly,

• Checks positive result for the Archimedean

screw correct rotation,

• Checks positive result / veriﬁcations before

starting and periodical,

• Finalized checks positive result and verify the all

safety conditions respect,

• Plug connection in opportune current socket,

• Place a gathering basin in the machine anterior

zone in correspondence of the ground meat exit

zone,

• Put in the machine left side and start the ma-

chine acting the control device of start “I”,

• Introduce manually the food product within the

machine neck and drive it towards the Archime-

dean screw using the pestle in equipment.

• At the end of the food product introduction, or

when from the drilled plate doesn’t come out

more the product, stop the machine acting the

control device of stop “0”.

It is recommended to make not work the machine

in vain, without the food product.

Switching off

In succession, the switching off must follow what

here under indicated:

• Before the switching off wait the food product

exile conclusion from the drilled plate,

• Stop the machine acting the control device of

stop “0”,

• Disconnect the machine plug from the feeding

socket,

• Perform the cleaning interventions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 282274 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info