Bedienungsanleitung Hendi 282274 (Seite 8 von 164) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741102

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

• the use of plates with holes diameter bigger

than 8mm is forbidden.

The user is however responsible of the damages

resulting from the lacked observance of the spec-

ified normal use conditions. For possible doubts

you can enquire at the Authorized Assistance

Center.

2. Safety instructions

2.1.

Warnings on the residual risks

RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN PARTS

For any evenience the operator must not try

to open or remove a fixed protection or tamper

a safety device.

In the phase of equipment, maintenance and

cleaning, and during all further manual opera-

tions that happens introducing the hands or other

body parts in the machine dangerous areas, a re-

sidual risk remains due above all to:

• Knocks with machine manufacturing parts,

• Grazing and/or abrasion with machine rough

parts,

• Cut with tools sharpened parts.

Besides, the operator and the maintenance man

must be skilled for the intervention connected

to the manual operations with open protections,

must be trained on the joined consequent risks

and must be authorized from a responsible per-

son.

2.2. Protection devices on the machine

The machine protections and safety devices must

not be removed.

If they must be removed for extraordinary mainte-

nance requirements some measures will have to

be immediately adopted ready to put in evidence

and to reduce at the possible minimum limit the

danger.

The putting back in its place of the protection or

of the safety device must happen as soon as the

reasons, that have made necessary their tempo-

rary removal, are stopped.

The machine transmission parts are completely

isolated by means of ﬁxed protections which don’t

allow the access for none kinematical chain.

Taking into account of the machine use modality

and its use destination, the moving elements aren’t

isolated from ﬁxed protections, moving protections

or other safety devices.

The grinding group parts result placed at some dis-

tances from the access points such for which some

dangerous points aren’t reachable.

For all safety functions including the control and

check systems parts joined to the safety, some

well-tested components and safety principles have

been used.

3. Transportation, put on service and use

The machine management is allowed only to the

authorized personnel and opportunely educated

and endowed of a sufficient technical experience.

Before to switch on the machine perform the fol-

lowing operations:

• Read with attention the technical documenta-

tion,

• Know what protections and emergency devic-

es are available on the machine, their location

and functioning.

The not authorized use of commercial parts and

accessories making part of the protections and

safety devices can cause some malfunctions and

the ranger situation beginning for the operators.

The operator must besides have received an ad-

equate training.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 282274 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info