741082
6
Zoom out
Zoom in
Vorherige Seite
1/160
Nächste Seite
6
EN
Preparations before installation
Carefully unbolt the machine from the skid using
wrench if necessary.
Remove all protective packaging and wrapping.
Check the machine for completeness and trans-
port damages. In case of incomplete delivery (e.g.
Whisk, flat beater and dough hook) or damage,
contact supplier immediately. DO NOT use the
machine. (See ==> Warranty).
Clean the machine and attachments before use
(See ==> Cleaning and Maintenance).
Make sure the appliance is completely dry.
Installation
Read this manual thoroughly and carefully before
installation and operation.
Ensure the machine is placed in a dry area that
have sufficient strength surface to support with
no any obstruction during operation nearby.
Ensure that the electrical power supply corre-
sponds with the rating label on the machine.
There should have adequate space around the
machine for the operator to operate. It should be
clean and free from obstructions, e.g. Nothing
placed on or around the machine, such as scrap-
ers, knives etc.
Do not wear loose fitting clothing such as scarf,
etc and long hair should be tied up and keep away
from the moving parts.
CAUTION! Never bypass any safety switch.
Transportation and handling
Do not move the machine while it is under op-
eration.
Unplug the machine, remove the bowl (2) and all
attachments (whisk, flat beater or dough hook)
when moving the machine.
Hold the base of the machine (1) when moving to
have better support.
With at least 2 people or using trolley for assis-
tance to move the machine due to heavy weight.
Special safety features
Attention: This machine has the following 3 safety switches. The machine only be started with all the safety
switches are at the proper positions.
Bowl position safety switch: The machine can be
started up once the bowl is positioned at the cor-
rect position.
Bowl guard (5) safety switch: The machine can
only be started up once the bowl guard (5) is in
the closed position.
Bowl lift up handle (9) safety switch: The machine
can only be started up once the bowl lift up han-
dle (9) is located in the upwards position.
Do not wear loose fitting clothing such as scarf, etc
and long hair should be tied up and keep away from
the moving parts
Operation
To avoid serious personal injury:
DO NOT operate the machine without reading the
instruction manual.
ALWAYS STOP the machine by pressing RED
“O” button (8) and unplug from electrical power
supply before cleaning, maintenance, repair or
changing any attachments.
ALWAYS keep hands, hair and loose clothing
away from the moving parts.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hendi 222973 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info