Bedienungsanleitung Hendi 223253 (Seite 21 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741865

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

STEAM REGULATION

Press the steam button and set the percentage of

steam acting on the encoder knob + press for con-

ﬁrmation. You can set from 0 – 10 and the below

table will indicate the percentage:

Value Steam percentage

0 0%

1 10%

2 20%

3 30%

4 40%

5 50%

6 60%

7 70%

8 80%

9 90%

10 100%

MANUAL HUMIDIFICATION

If you press the steam button this allows introduc-

ing steam as long as it remains pressed

COOKING PROGRAMS STORAGE

To program a cooking process press the button and

acting on the encoder you can select the program

number to set. The programs that appear with

a ﬁx number are already ﬁtted. In case the program

number is ﬂashing this means is a empty program

and you can start to inlet all information.

Loading a storage cooking program: If you want

to use memorized program press the cooking pro-

gram button and acting on the encoder you can

select the program number desired + press the

encoder for conﬁrmation and oven will start oper-

ating.

Load New program: If you want to memorize new

program press the cooking program button and

acting on the encoder you must reach the ﬁrst

number that is ﬂashing + press conﬁrmation.

Now you can start to inlet all information for the

ﬁrst phase (temperature, time, steam, etc.) and you

will see the light on the led n. 1 + press the cooking

program button and you will skip to second phase

(see the led on n. 2 position). Introduce all infor-

mation for the second phase (temperature, time,

steam, etc.) + press the cooking program button

and you will skip to third phase (see the led on n.

3 position). Introduce all information for the third

phase (temperature, time, steam, etc.) + press the

cooking program button and you will skip to fourth

phase (see all 3 led lighting). Introduce all infor-

mation for the fourth phase (temperature, time,

steam, etc.) + press the cooking program button

for 5 seconds until will appear MEM (means that

program was memorized).

In case the cooking process as only 1 or 2 phase

when you ﬁnished to set the information (temper-

ature, time, steam, etc.) + press the cooking pro-

gram button for 5 seconds until will appear MEM

(means that program was memorized).

RETURN TO MANUAL COOKING MODE

To exit the program function and return to the

MANUAL cooking mode, hold the ENCODER knob

down until the word “MAN” appears on the display.

PRE-HEATING

It consists in heating the oven at a temperature

greater than 20% with respect to the temperature

set by the second program. This function is used

to compensate the loss of heat that occurs upon

opening the oven and upon the introduction of food

products there in. To activate pre-heating press the

cooking program button and acting on the encoder

go to ﬁrst program number that is ﬂashing + press

for conﬁrmation. Now we are on ﬁrst phase so

press the timer button and acting on encoder go

to “inﬁn” (this means that the oven will run without

speciﬁc timing) + press encoder for conﬁrmation.

Now you can introduce the other phase as indi-

cated previously and at end memorize. The oven

will start to pre-heat the cooking chamber until

reached 20% above the cooking temperature set

and after you will hear beep sound. The signal is

interrupted by opening the door (to introduce the

food products into the oven), thus the stage preset

by the program starts. The signal can be stopped

without enabling the stage or disabling preheating

simply by pressing the START/STOP button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 223253 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info