Bedienungsanleitung Hendi 223291 (Seite 6 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741863

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

1.2 WARRANTY

Any defect affecting the functionality of the ap-

pliance which becomes apparent within one year

after purchase will be repaired by free repair or re-

placement provided the appliance has been used

and maintained in accordance with the instructions

and has not been abused or misused in any way.

Your statutory rights are not affected. If the appli-

ance is claimed under warranty, state where and

when it was purchased and include proof of pur-

chase (e.g. receipt).

In line with our policy of continuous product devel-

opment we reserve the right to change the product,

packaging and documentation speciﬁcations with-

out notice.

1.3 DISCARDING & ENVIRONMENT

At the end of the life of the appliance, please dispose

of the appliance according to the regulations and

guidelines applicable at the time.

Throw packing materials like plastic and boxes in the

appropriate containers.

2. PRELIMINARY OPERATIONS

Once unpacked, ensure the oven is intact and does

not show signs of damage due to transport. A dam-

aged appliance must never be installed and com-

missioned; if in doubt, immediately contact the af-

ter-sales technical assistance or your own dealer.

In the case of damage or missing parts inform the

carrier and retailer/manufacturer immediately, in-

dicating the code (Art.) and serial number (Ser N°)

and attach a photo.

Check that the installation area is kept clear so that

doors, corridors and passageways are accessible.

3. INSTALLATION AREA

The appliance shall be installed in enclosed and well

ventilated areas (not outdoors).

The ambient temperature of the place of installa-

tion of the oven must be higher than +4°C.

Before positioning the appliance, check the overall

dimensions and the exact position of the electri-

cal, water and fumes exhaust connections, fumes

exhaust.

It is advised to place the oven under an extractor

hood or in such a way that hot fumes and odours

exit the oven via adequate ventilation to the outside.

The oven must be placed on a ﬂat surface so that it

does not slip or turn over.

The installation area must be able to support the

weight of the appliance ﬁlled to the maximum.

See the information level on the back of the oven

for the gross weight.

Make sure that it is placed so that the door may be

fully opened.

Position it so that the back of the oven is easily ac-

cessible for maintenance, connection to the mains

sockets, and water.

The appliance is not meant to be ﬁtted and a 5 cm

space must be left all round it.

Do not position other heat sources like, fryers or

hotplates, near the oven. If this is not possible at

least respect the following distances from machin-

ery: 50 cm from the sides and above the appliance

and 70 cm from behind.

Do not place the device near materials or contain-

ers of inﬂammable liquids (such as walls, furniture,

screens, gas canisters) as it can be a ﬁre hazard. If

this is not possible, cover the inﬂammable parts

with ﬁre and heatproof material and by checking

ﬁre hazard regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 223291 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info