Bedienungsanleitung Hendi 215012 (Seite 6 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741307

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Switch ON

• Make sure the tap is closed and that the oil tank

has enough oil, level should be between MIN and

MAX marking.

• Connect the power plug to a suitable electrical

supply outlet.

• Next, press the power switch at the rear side of

the appliance to connect the power supply. Green

indicator on the power switch will light up.

• Now the appliance is connected to electrical sup-

ply.

Operation

• Press ON / OFF (1) to switch ON the appliance.

FILL OIL (5) indicator ﬂashes and buzzer sound

will be heard to alert the user to ﬁll up the oil

tank container.

• Then, please make sure again the oil level is be-

tween the MIN and MAX marking.

• If the oil tank contains enough oil, press FILL OIL

(5) to cancel the buzzer sound and the indicator

light. The display will show the default tempera-

ture of 140°C.

• After that, press UP (3) or DOWN (4) button to

increase or decrease the temperature. (Range:

60°C ~ 190°C, with 5°C interval).

• When the oil doesn’t reach the set temperature,

“HEATING Indicator” will light up and “KEEP

WARM Indicator” will go out.

• When the oil temperature reaches the set tem-

perature, “HEATING Indicator” will go out and the

“KEEP WARN Indicator” will light up.

Note: During operation, if no temperature is set,

the appliance will maintain to the default temper-

ature 140°C.

Setting Timer

• Timer can be set by pressing the TIMER (2) to

enter TIMER mode.

• Then, press UP (3) or DOWN (4) to increase or

decrease the time. (Range: 0 min ~ 15 mins, with

30 seconds interval). Default setting is 0 min.

• When the timer is set, it will be stored automati-

cally within 5 seconds. Then, timer will be started

to count down from the set time.

• Display (6) will alternate between Time remaining

/ Set temperature.

• When the set time has elapsed, a beeping sound

(long and short) will be heard and “End” will be

shown in the display (6). The appliance will keep

on heating if the set temperature isn’t reached.

• Press and hold the UP (3) or DOWN (4) for fast

adjustment of timer.

Note: 1. Press and hold the increase setting button

(3) or decrease setting button (4) for fast

adjustment.

2. Every time, you press any button on the

panel, a short beep sound will be heard to

alert the user.

3. After an extended period of operation, it is

normal for the cooling fan inside to con-

tinue running in OFF mode for some time.

Before unplug the appliance, wait until the

cooling fan stops running.

4. The appliance’s outer surface is still hot

even after switch to OFF mode. Please

wait the appliance completely cool down

before touching or cleaning.

5. If no any button on the control panel is

pressed during operation for 4 hours, the

appliance will then switch to OFF mode

automatically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 215012 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info