Bedienungsanleitung Hendi 239209 (Seite 7 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741228

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

- Temperature control: you can set the tem-

perature between 60°C and 240°C in 20°C in-

crements. Default setting for the appliance is

200°C. ATTENTION! The set temperature is that

of the glass plate and not the temperature in

the pan!

• If you select power level, select “Power” using

the “Function” key. Now you can set the power

required by means of the arrow keys,

• If you select temperature control, select “Temp”

using the “Function” key. Now you can set the re-

quired temperature by means of the arrow keys

between 60°C and 240°C in 20°C increments.

• After setting the power level or temperature, you

can optionally to set the timer. This timer switch-

es the appliance off after the programmed time

has been reached. You do this by pressing the

“Function” key once more after setting the power

level or temperature, and selecting “Timer”. Now

you can set the required time in 5 minute incre-

ments. The maximum time is 180 minutes.

• The display will go off and the lights next to “ ”,

“ ” and “ ” will go off. The light next to the

“ON/OFF” will stay lit.

• If you do not use the appliance for an extended

period, remove the plug from the wall-mounted

electrical socket and remove the pans from the

appliance.

• ATTENTION! Allow the appliance to cool off be-

fore you touch it. The glass plate is very hot after

use.

Cleaning and maintenance

• Always remove the plug from the socket before

cleaning the appliance and wait until the unit is

cooled down completely.

• Beware: Never immerse the appliance in water

or any other liquid!

• Clean the outside of the appliance with a damp

cloth (water with mild detergent).

• Never use aggressive cleaning agents or abra-

sives. Do not use any sharp or pointed objects.

Do not use petrol or solvents! Clean with a damp

cloth and detergent if necessary.

• Clean the ventilation slots (if applicable) with the

vacuum cleaner.

• Clean the glass cooking top every time after you

use it to prevent any residues from burning onto

the glass cooking top.

Failure codes

Code Failure Possible cause Possible solution

E01 Overheating of the electro-

nics

Insufﬁcient ventilation Check ventilation slots on

dust and make sure there

is enough space around the

appliance.

Switch the appliance off, let it

cool off and switch it on again

E02 The pan on the glass plate is

overheating

Empty or overheated pan or

pan with too hot oil

Remove the plug from the

wall-mounted electrical

socket, let it cool off and plug

it back in

E03 Mains voltage too high or

too low.

Fault in the mains Electrical installation is not

in order, have an electrician

check it

In all other cases please contact your supplier. In case of any doubt, always contact your supplier!

• Use only pans that are suitable for induction and

have not been used before on other sources of

heat.

• Pans with a sandwich bottom that have been

used on gas, can warp and are not suitable any-

more for electric, ceramic, halogen or induction

cooking.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 239209 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info