Bedienungsanleitung Hendi 239391 (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741223

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Setting Temperature level

• During operation, press the temperature button

(7) to activate. The indicator light (7) will light up.

• Use the increase setting (3) or decrease setting

button (5) to increase or decrease the tempera-

ture level (Range: 35°C ~ 240°C). Default setting

is 100°C. Higher temperature level is suitable for

roasting, grilling or frying.

Setting Timer

• After power or temperature setting for cooking,

you can opt for timer setting. Press the timer but-

ton (2) to activate. The indicator light (2) lights up.

• Use the increase setting (3) or decrease setting

button (5) to increase or decrease the cooking

time (Range: 0 min ~ 180 mins). Default setting

is 0 min.

• When the timer is set, it will be stored automat-

ically within 5 seconds. The appliance will then

start operation. It will display the remaining time

and the power setting / temperature setting al-

ternately on the display (4).

• The appliance will go into Standby mode when

the set time is elapsed.

• If the set time is reduced to “0 min” manually,

the appliance will go into Standby mode instantly.

Note:

1) Press and hold the increase setting button (3) or

decrease setting button (5) for fast adjustment.

2) After an extended period of operation, it is nor-

mal for the cooling fan inside to continue run-

ning in Standby mode for some time. Before

unplug the appliance, wait until the cooling fan

stops running.

3) The appliance’s surface is still hot after switch to

Standby mode. Wait completely cool down before

touching.

Error codes display

Error codes shown on the display (4) Possible cause Possible solution

E 1 The temperature of the appliance is

too high

Clear all obstacles that around the

appliance. Unplug the appliance, re-

move the pan or pot, wait until the ap-

pliance is completely cool down.

Cooling fan defective Contact the supplier.

E 2 The pan or pot is overheated.

Possibly, the pan becomes empty and

appliance will shut down for protec-

tion.

Unplug the appliance, remove the

pan or pot, wait until the appliance is

completely cool down. And make sure

water is inside the pan.

E 3 The supply voltage is abnormal. (Sup-

ply voltage is too high or too low)

Make sure that the appliance is con-

nected to a suitable electrical power

supply.

Cleaning and Maintenance

Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely

before cleaning and storage.

Cleaning

• Never immerse the appliance in water or other

liquids.

• Clean the cooled exterior surface with a slightly

damp cloth or sponge with some mild soap solu-

tion.

• Never use abrasive sponges or detergents, steel

wool or metallic utensils to clean the interior or

exterior parts of the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 239391 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info