Bedienungsanleitung Hendi 239711 (Seite 8 von 76) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741212

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

• If you select temperature control, select “Temp”

using the “Temp/heating” key. Now you can pro-

gramme the required temperature by means of

the arrow keys between 35°C and 240°C in 5°C

intervals.

• After programming the capacity or temperature,

you can opt to programme the timer. This timer

switches the appliance off after the programmed

time has been reached. You do this by pressing

the “Timer” key after programming the capacity

or temperature, and selecting “Timer”. You can

now set the desired time. The maximum pro-

grammable time is 180 minutes.

• Once you have reached the required result, you

can switch off the appliance by pressing the “ON/

OFF” key. The display will go off and the lights

next to “Power”, “Temp” and “Timer” will go off.

• If you do not use the appliance for an extended

period, remove the plug from the wall-mounted

electrical socket and remove the pans from the

appliance.

Note:

1. After an extended period of operation, it is nor-

mal for the cooling fan inside to continue run-

ning in OFF mode for some time. Before unplug

the appliance, wait until the cooling fan stops

running.

2. The appliance’s surface is still hot even after

switch to OFF mode. Please wait the appliance

completely cool down before touching or clean-

ing.

3. If no cookware is placed on the heating surface

after switch ON, it will turn to OFF mode auto-

matically within 1 min.

4. If no any button on the control panel is pressed

during operation for 2 hours, the appliance will

then switch to OFF mode automatically.

5. If the appliance beeps after being switched on,

the pan you are using is not suitable for induc-

tion or the appliance is defective. In case of any

doubt, always contact the supplier of your pan!

Error codes display

Error codes shown on the

display (5)

Possible cause Possible solution

E01 The temperature of the appliance is too high Unplug the appliance, remove the cook-

ware, wait until the appliance is com-

pletely cool down.

Cooling fan defective Contact the supplier.

E02 The temperature of the cookware is too high.

Possibly, the cookware becomes empty and

appliance will shut down for protection.

Unplug the appliance, remove the cook-

ware, wait until the appliance is com-

pletely cool down.

E03 The supply voltage is abnormal. (Supply volt-

age is too high or too low)

Make sure that the appliance is connect-

ed to a suitable electrical power supply.

Cleaning and Maintenance

Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely

before cleaning and storage.

Cleaning

• Never immerse the appliance in water or other

liquids.

• Clean the cooled exterior surface with a slightly

damp cloth or sponge with some mild soap solu-

tion.

• Never use abrasive sponges or detergents, steel

wool or metallic utensils to clean the interior or

exterior parts of the appliance.

Storage

• Before storage, always make sure the appliance

has already been disconnected from the electri-

cal outlet and cooled down completely.

• Store the appliance in a cool, clean and dry place.

• Never put heavy objects on the heating surface

during storage as it may crack it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 239711 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info