Bedienungsanleitung Hendi 239698 (Seite 9 von 76) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741214

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Troubleshooting

If the appliance does not function properly, please

check the below table for the solution. If you are

still unable to solve the problem, please contact the

supplier/service provider.

• Error codes shown on the digital display (5). (See

--> Error codes display)

Problems Possible cause Possible solution

The appliance does not switch ON.

- Power plug is not connected properly

with the electrical outlet.

- Without switch ON the appliance by turn

ON the knob.

- Check the power plug to make sure

it is connected properly.

- Switch ON the appliance by turning

ON the knob.

Cooling fan is operating even after

the appliance is switched to OFF

mode.

- This is normal. The cooling fan contin-

ues running in Standby mode for some

time to cool down all internal elements.

- Wait until the cooling fan stops ro-

tating.

Technical specification

Item no. 239698 239711 239872

Operating voltage & frequency 220-240V~ 50/60Hz

Rated input power 3500W

Temperature setting 35°C ~ 240°C (with 5 °C interval)

Power setting 100W ~ 3500W

Timer setting Up to 180 minutes

Protection class Class I

Waterproof protection class IPX3

Dimension 390x500x(H)120mm 340x440x(H)120mm 340x440x(H)120mm

Remark: Technical specification is subjected to change without prior notification

Warranty

Any defect affecting the functionality of the ap-

pliance which becomes apparent within one year

after purchase will be repaired by free repair or re-

placement provided the appliance has been used

and maintained in accordance with the instructions

and has not been abused or misused in any way.

Your statutory rights are not affected. If the appli-

ance is claimed under warranty, state where and

when it was purchased and include proof of pur-

chase (e.g. receipt).

In line with our policy of continuous product devel-

opment we reserve the right to change the product,

packaging and documentation speciﬁcations with-

out notice.

Discarding & Environment

When decommissioning the appliance, the prod-

uct must not be disposed of with other household

waste. Instead, it is your responsibility to dispose to

your waste equipment by handing it over to a des-

ignated collection point. Failure to follow this rule

may be penalized in accordance with applicable

regulations on waste disposal. The separate col-

lection and recycling of your waste equipment at

the time of disposal will help conserve natural re-

sources and ensure that it is recycled in a manner

that protects human health and the environment.

For more information about where you can drop off

your waste for recycling, please contact your local

waste collection company. The manufacturers and

importers do not take responsibility for recycling,

treatment and ecological disposal, either directly

or through a public system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 239698 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info