Bedienungsanleitung Hendi 239421 (Seite 6 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741233

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Preparations before using for the first time

• Remove all protective packaging and wrapping.

• Check to make sure the appliance is undamaged.

In case of incomplete delivery and damages.

Please contact supplier (See == > Warranty).

• Clean the appliance before use (See == > Clean-

ing and Maintenance).

• Make sure the appliance is completely dry.

• Place the appliance on a horizontal, stable and

heat resist surface that is safe against water

splashes.

• Ensure that there is sufﬁcient ventilation. Keep

a minimum distance of 20 cm around the appli-

ance.

• Do not place the appliance in close proximity to

devices which are sensitive to disturbances by

magnetic sources (e.g. radios, tape decks).

Note: Due to manufacturing residues, the appli-

ance may emit a slight odor in the ﬁrst few cycles.

This is normal and does not indicate any defect or

hazard. Make sure the appliance is well ventilated.

Suitable cooking equipment

Suitable Not suitable

Bottom of cookware Flat bottom

Curved, uneven, rounded bottom

Material Cookware with iron, cast iron, mag-

netic stainless steel or enamelled iron

bottom.

Cookware with ceramic, glass, copper,

bronze, or aluminium bottom.

Diameter of the bottom Between 14 cm and 28 cm. Less than 14 cm or more than 28 cm.

Type of cookware Cookware with a bottom thickness

over 1.5 mm.

Completely closed containers or cans.

Note: Using a pan or pot that’s not suitable for induction cooking may damage the appliance.

Operation

• Place a suitable pan or pot at the centre of the

heating surface of the appliance. (See - - > Suita-

ble pans for the appliance).

Note: Do not place empty pan as this may damage

the pan and the appliance.

• Connect the power plug to a suitable electrical

supply outlet. On/Standby button (1) will be light

up and the appliance now in Standby mode.

• Then, switch On the appliance by pressing On/

Standby button (1) and Power button (6) will ﬂash.

• Next, choose to press either the power button (6)

or temperature button (7) to start cooking. If the

timer button (2) is not set, the appliance will op-

erate continuously.

• Once you have ﬁnished cooking, switch to Standby

mode by pressing the On/Standby button (1). The

digital display (4) and all buttons will go off except

On/Standby button (1).

Note: If no any button on the control panel is

pressed during operation for 2 hours, the appliance

will then switch to Standby mode automatically.

Setting Power level

• During operation, press the power button (6) to

activate. The indicator light (6) will light up.

• Use the increase setting (3) or decrease setting

button (5) to increase or decrease the power level

(Range: 100W ~ 3500W). Default setting is 100W.

Higher power level is suitable for steaming.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 239421 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info