Bedienungsanleitung Hendi 239780 (Seite 6 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741208

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Preparations before using for the first time

• Remove all protective packaging and wrapping.

• Check to make sure the appliance is undamaged.

In case of incomplete delivery and damages.

Please contact supplier (See == > Warranty).

• Clean the appliance before use (See == > Clean-

ing and Maintenance).

• Make sure the appliance is completely dry.

• Place the appliance on a horizontal, stable and

heat resist surface that is safe against water

splashes.

• Ensure that there is sufﬁcient ventilation. Keep a

minimum distance of 15cm around the appliance

bottom of cookware

• Do not place the appliance in close proximity to

devices which are sensitive to disturbances by

magnetic sources (e.g. radios, tape decks).

Note: Due to manufacturing residues, the appli-

ance may emit a slight odor in the ﬁrst few cycles.

This is normal and does not indicate any defect or

hazard. Make sure the appliance is well ventilated.

Suitable cooking equipment

Suitable Not suitable

Bottom of cookware Flat bottom

Curved, uneven, rounded bottom

Material Cookware with iron, cast iron, magnetic stain-

less steel or enamelled iron bottom.

Cookware with ceramic, glass, copper,

bronze, or aluminium bottom.

Diameter of the bottom Between 12 cm and 26 cm. Less than 12 cm or more than 26 cm.

Type of cookware Cookware with a bottom thickness over 1.5 mm. Completely closed containers or cans.

Note: Using a pan or pot that’s not suitable for induction cooking may damage the appliance.

Operation

• Place a suitable cookware at the centre of the

heating surface of the appliance. (See --> Suita-

ble cookware for the appliance).

Note: Do not place empty cookware as this may

damage the cookware.

• Connect the power plug to a suitable electrical

supply outlet.

• Then, switch ON the appliance by turning the

knob (2) in clockwise direction.

• “ON” will be shown instantly on the display (1).

• Next, choose the power level by turning the knob

(2) clockwise.

• Minimal setting is 500W which increases in steps

of 100 W to the maximum setting of 3500 W for

item 239780 or 3000W for item 239315.

• Now, the appliance starts heating operation. The

set power will be shown on the display (1) during

cooking.

• After cooking ﬁnished, you can turn off the ap-

pliance at any time by turning the knob (2) an-

ti-clockwise. “OFF” will be shown on the display

(1) for few seconds and then go off.

Note:

1). After an extended period of operation, it is nor-

mal for the cooling fan inside to continue run-

ning in OFF mode for some time. Before unplug

the appliance, wait until the cooling fan stops

running.

2). The appliance’s surface is still hot even after

switch to OFF mode. Please wait the appliance

completely cool down before touching or clean-

ing.

3). If no cookware is placed on the heating surface

after switch ON, it will turn to OFF mode auto-

matically within 1 min.

4). If no any button on the control panel is pressed

during operation for 2 hours, the appliance will

then switch to OFF mode automatically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 239780 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info