Bedienungsanleitung Hendi 224847 (Seite 5 von 48) (Deutsch, Englisch, Holländisch, Italienisch, Polnisch)

741088

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Grounding installation

This appliance is classiﬁed as protection class I

appliance and must be connected to a protective

ground. Grounding reduces the risk of electric

shock by providing an escape wire for the electric

current. This appliance is equipped with a cord

having a grounding wire with a grounding plug. The

plug must be plugged into an outlet that is properly

installed and grounded.

Before use

• Remove all protective packaging and wrapping.

• Check for the completeness of the product. In

case of incomplete delivery and damages. Please

contact supplier (See == > Warranty).

• Clean the machine thoroughly with a dry cloth or

a soft brush (not included).

• After ﬁxing the machine on a suitable surface, the

cleaning operation can be completed by passing

a piece of pasta through the rollers and the cut-

ters (to remove any dust). Then, throw away this

the pasta used for this operation.

• Never wash the machine body or the accessory

under running water or the accessory in a dish-

washer.

Operation (Making pasta sheet)

• Position the machine on a suitable surface which

can bear the appliance’s weight.

• Fit the container/ tray (not supplied) to the appli-

ance’s openings for placing the pasta sheet.

• After turning the knob to the position “7”, place

part of the prepared dough on the rollers.

• Press down the button to start operation & mak-

ing pasta sheet.

• Insert the dough gently and this will roll out the

pasta. Repeat this operation until a ﬂat sheet of

pasta is obtained.

• To reduce the thickness of the pasta sheet, press

down the button again of the appliance. And turn

the knob to reduce the distance between the pas-

ta rollers.

• Pass the pasta sheet repeatedly through the roll-

ers until it is of the desired thickness.

Note: Please check with your recipe for making the

dough.

Operation (Cutting)

• Position the machine on a suitable surface which

can bear the weight, ﬁt the supplied clamp into

the opening, tightening the screw until the ma-

chine is ﬁrmly locked to the surface.

• Fit the container/tray (not supplied) to the pasta

machine’s openings for placing the pasta.

• Press down the button to start operation & cut-

ting the pasta sheet.

• Fit the pasta sheet to the machine with your de-

sired cutting blade (tagliatelle or fettuccine).

Cleaning and maintenance

• Attention! Unplugged the appliance before clean-

ing.

• Do not remove residues of pasta using sharp

utensils. (Use soft brushes, not supplied).

• Never wash the appliance body or the accessory

under running water or the accessory in a dish-

washer.

• Never wash any part of the appliance or the ac-

cessory in a dishwasher.

• Clean the appliance thoroughly with a dry cloth

or a soft brush.

• Check that the parts are perfectly dry before put-

ting them away.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 224847 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info