Bedienungsanleitung Hendi 232491 (Seite 5 von 176) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

742365

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

3. Introduction

Positioning of blast chiller

Before unloading/loading and positioning the blast

chiller inside the shop/kitchen, you are kindly re-

quested to read carefully the instruction manual

in the different chapters regarding the unloading/

loading, dimensions, weight, evaporating water ba-

sin, adjustable feet, electric connections and main-

tenance procedures of the blast chiller subjected in

the present manual.

Transport

Do not superimpose blast chiller packing (allowed

only if there is wooden crate packing option). We

recommend you to transport the blast chiller al-

ways in the upright position (as mention on the

packing). If the blast chiller with built in condensing

unit was inclined during transportation we suggest

you to keep the product in the suggested upright po-

sition for at least 8 hours, before switching it on. In

this way, you will allow the oil to ﬂow in all the com-

ponents, lubricating them again. Afterwards you

can proceed with the start.

Unloading/ Dimensions/ Weight

The unloading/loading procedures should be exe-

cuted by pallet-jack or by forklift driven by skilled

and authorized staff. We decline any liability for fail-

ing to comply with safety rules currently in force.

Before starting the unloading, positioning and in-

stallation procedures of the blast chiller freezer

inside the shop/kitchen according to the model of

the blast chiller, please read carefully the informa-

tion showed in the dimensions and weights list.

The manufacturer declines any responsibilities due

to operations performed without adopting the above

safety precautions.

Packing

At the delivery please check that the packing is in-

tact and that during transportation no damage was

occurred. Remove the external carton-box; remove

the fastener that keeps still the blast chiller/freezer

to its pallet, put it in the correct position and then

remove the adhesive white protection of the stain-

less steel. The recovery and the recycling of the

packing materials such us, plastic, iron, carton box,

wood help the saving of row material and reduce the

waste. Please consult your area address book for

disposal of materials and authorized garbage

dump.

Condensate water draining / draining connection

The blast chiller is available with a built in condens-

ing unit complete with a removable condensate wa-

ter basin with manual defrost (without defrost heat-

er). The basin is assembled in the lower part, under

the condensing unit.

Positioning and feet regulation

Place the blast chiller in a perfect horizontal posi-

tion, acting if necessary on the screw type adjusta-

ble feet. Use a spirit level to check it. The blast chill-

er must be placed in order to operate properly and

allow the correct defrost condensate water drain-

ing. In this way you will avoid

noisy vibrations of the condens-

ing unit. Check the correct posi-

tioning of the condensate water

basin and its draining.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 232491 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info