Bedienungsanleitung Hendi 224335 (Seite 12 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741156

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

VOLTAGE LACKING

In case of electric feeding breaking or if the machine

is disconnected from the electric net, this last one

will be able to be restarted only following the star-

ting function, after the electric feeding back or the

reconnection to the electric net.

CONTROLS AND VERIFICATIONS BEFORE STARTING

VERIFICATION / CONTROL MODALITIES AND CHECKS

Check that:

• There aren’t inside the pot

extraneous objects

Sight control of the indicated parts, to check of objects or extraneous bodies

lacking as for example different tools, clothes, etc … and that there isn’t however

the food product

Check the cleaning:

• Of the machine external sides

• of the tool along its surface

• of the tool external sides

All indicated parts surfaces, before the machine use must be checked visually to

verify their cleaning. In case of molds presence or other type of dirtiness, provide

with the cleaning procedure in accordance with the chapter 5 indications.

Check the integrity:

• of the ﬁxed protections

• of the machine body

All ﬁxed protections, etc.. must perform the function for which have been

foreseen. Indicated parts sight check to verify their integrity in their surface

external part. The parts must be however changed at the ﬁrst erosion signals or

breaking (cfr. Authorized Assistance Center).

Check the functionality:

• of the control system

parts / control about the

safety;

• of the control devices.

All devices must perform the function for which have been foreseen. Control

directly the devices so that these ones determine the waiting function.

The actuators and all parts must be however changed to the ﬁrst erosion signals

or breaking (cfr. Authorized Assistance Center).

Check the absence:

• of strange noises after

the starting

During the functionality checking of the control devices, if there are strange

noises, due for example to a seizing or mechanical breaks, stop immediately the

machine and activate the maintenance service.

For any intervention type or for the parts change that

are damaged, activate the maintenance service.

The possible change must happen with manufactur-

er original products or at least of quality, safety and

equivalent characteristics. For analysis contact the

Authorized Assistance Center.

PUT IN FUNCTION

The machine operator can put in function the machi-

ne following in order the under reported indications:

• Positive controls result for the preparation pre-

liminary operations,

• Positive controls result for the electric feeding,

• Plug connection in opportune current socket,

• Positive controls result for the assembly,

• Positive controls result / checks before the starting,

• Positive controls result ﬁnalized to check the re-

spect of all safety conditions,

• Introduce manually the feed product inside the pot,

• With the use of both the hands take the machine

in the foreseen zones:

– Place it with the tool inside the pot,

– Start, maintain and handle it up to the end of the

feed product work,

• When the food product has reached the desired

solidity, stop the machine and placed on a support

adequate bench,

• Discharge manually the pot feed product, taking it

with both the hands and pouring out the feed

product where necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 224335 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info