Bedienungsanleitung Hendi 230305 (Seite 12 von 124) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

742485

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Maintenance / Care / Repair

The perfect operation and safe use may be ensured

only through the correct use of the appliance, as

well as the compliance with the operation instruc-

tions, the corresponding speciﬁcations and the

care and cleaning indications.

This applies both for the compliance of the provi-

sions of law on appliance safety (GSG) and the ex-

isting speciﬁcations of ZH 1 and VBG on accident

prevention.

RECOMMENDATION: Before cleaning or mainte-

nance works, the appliance should not be connect-

ed with voltage through the installed main switch /

fuse. The appliance should never be sprayed with

water or high pressure cleaning aid, because any

insertion of water in the electrical elements may

affect the regular operation of the appliance as

well as the protection against electrical shock (in-

sulating protection).

We recommend that you prepare a relevant main-

tenance agreement for all maintenance and repair

works with our company (or with a service team /

workshop of an authorized local dealer who sold

the appliance).

All works / repairs performed in this appliance

must be reported on the last page of the operating

instructions, along with the signature / company

name.

Substantially, no safety arrangement should be put

out of operation. If the disassembly of individual

safety arrangements is required, e.g. for mainte-

nance or repair works, the reassembly of the rel-

evant safety arrangements should be performed

immediately after the completion of works.

Unloading the water from the dishwasher’s tank (dispenser)

• Turn OFF the power of the dishwasher

• Empty the washing dispenser removing the over-

ﬂow hose A.

• Remove the ﬁlter B and clean it carefully with

water.

• Rinse the washing compartment to remove any

dirt residues.

• Then, reassemble the parts in reverse order. The

appliance should never operate without a ﬁlter.

• During non-operation, the door should remain

half-open or completely open (in order to avoid

odours).

Regular maintenance and cleaning works

Regularly, you should remove the rotating arms

and sprinkler, clean them carefully with water and

reposition the parts in reverse order. This work

should be performed with great care.

Pay attention to the correct position of filters and sprinkler!

• Do not clean the sprinkler’s injectors with tools

or sharp objects.

• You may clean the appliance with warm water and

conventional cleaning aids. Rub with water and

then let it dry. The stainless steel parts should

be treated with special means for steel and you

should never clean them with steel wire, brush,

etc. Also, you should never let them touch the

surface, since even the lightest contact with the

surfaces may cause rust formation. You should

use brushes made of polymer plastic or natural

brushes or thin wire.

• You should take care to move towards the

smoothing direction, so that you will not scratch

the surface. Finally, rinse with clean water and

dry thoroughly.

• We remind you that corrosion (rust formation) on

stainless steel surfaces is not created by itself,

but rather due to the use of improper cleaning aid

(e.g. whitening or particularly caustic cleaning

aid based on chlorine). Following a particular pe-

riod of use, calcium sediments are formed in the

internal walls of the dispenser (due to mineral

particles in the water), which may affect the cor-

rect operation of the appliance. For this reason,

regular removing of salt formations is required.

• We recommend letting this work (removing of

salt formations) to be performed by specialized

personnel (or by an authorized local dealer who

sold the appliance).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 230305 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info