Bedienungsanleitung Hendi 229033 (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741257

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

• Press the ON / OFF button to start the opera-

tion, the LED display will show the default time

“10:00” (10 hours). All buttons on the control pan-

el will be lighted up in blue.

Time setting:

• Now, you can press button + or - to increase or

decrease operation time. (Range: 00:30 ~ 24:00,

interval is 30 minutes).

• The setting time will be stored automatically

within few seconds.

• Then, the appliance will start operation and re-

maining time will be shown on the LED display.

The fan at the rear side of the appliance will start

rotation.

Temperature setting:

• Press TEMP / TIME button once to check the

temperature setting, you can also press button

+ or - to increase or decrease operation temper-

ature setting. (Default temperature: 70°C, range:

35°C ~ 75°C, interval is 5°C).

• The setting temperature will be stored automat-

ically within few seconds and return to display

remaining time on the LED display.

• If you want to check the temperature that was

set, press TEMP / TIME button once and the set

temperature will be shown on the LED display.

• During the operation process, you can check

or change the time and temperature setting by

pressing the TEMP / TIME button. And then press

button + or - to increase or decrease the temper-

ature and time setting.

Switch to STANDBY mode

• Press ON / OFF button to turn to STANDBY mode. All the buttons will go out except the ON / OFF button.

And the LED display will be shown as “ 0000 “ in white.

Time setting end up

• When the setting time counts down to 00:00, the

heating elements stop working ﬁrst. The cool-

ing fan will still continue running for about 10

seconds and 20 times of “beep” sound from the

buzzer will be heard to remind the user the oper-

ation is ﬁnished.

• ‘End’ will be shown on the LED display and the

appliance is in STANDBY mode.

• Unplug the appliance and wear gloves (not in-

cluded) if necessary to take out the food.

Cleaning and Maintenance

Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely

before cleaning.

Cleaning

• Clean the inside and outside of the appliance,

trays, bottom pad and door with luke-warm wa-

ter, a mild detergent and a soft cloth. Do not clean

the fan part.

• Dry all parts with a dry cloth before storing the

appliance.

• Occasionally clean the fan unit with a vacuum

cleaner.

• Note! To avoid damaging the appliance, do not

clean the appliance with aggressive chemical or

abrasives

Storage

• Before storage, always make sure the appliance

has already been disconnected from the electri-

cal outlet and cooled down completely.

• Store the appliance in a cool, clean and dry place

and out of reach of the children.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 229033 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info