Bedienungsanleitung Hendi 233887 (Seite 8 von 96) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

742339

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Cleaning & Maintenance

Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely before

cleaning or doing repair or maintenance work. And this should be performed by qualiﬁed and authorized

technician only.

Cleaning

• Clean the appliance regularly.

• The exterior and interior surfaces can be cleaned

with a damp cloth and some mild cleaning agent.

• Do not use water jet or steam cleaner for clean-

ing and do not immerse the appliance under the

water.

•

After the cleaning procedure, you should use a soft

and dry cloth to wipe the surface dry thoroughly.

• Never use hot water for cleaning the appliance.

• Never use aggressive or coarse cleaning agents

such as sourcing powder, alcohol, solvents or

other substances that could damage the appli-

ance’s surfaces.

• If not in use for a long period of time, left the

freezer open to avoid accumulation of unpleasant

smell inside.

Defrosting

• Defrost the freezer when the frost layer reaches

a thickness of about 10-15mm.

• The best time to defrost the freezer when it con-

tains no or only little food.

• To remove the frost, do these steps:

1. Set te temperature regulator to the “0” posi-

tion and unplug the freezer.

2. Remove any stored food, wrap it in several lay-

ers of newspaper and put it in a cool place.

3. Leave the lid open, remove the stopper in-

side the interior cabinet (3) and unscrew

anti-clockwise the cover of the drain hole

(8). Collect all defrost water on a tray. Use a

scraper to remove the ice quickly.

4. When defrosting is completed, dry the interior

thoroughly and reﬁt the stopper.

5. Plug in again and set the temperature regula-

tor to obtain the maximum coldness and run

the appliance for two or three hours using this

setting.

6. Reload the previously removed food into the

cabinet compartment.

Important!

• Never use sharp metal tools to scrape off frost

as you could damage the appliance. Do not use

a mechanical device or any artiﬁcial means to

speed up the thawing process other than those

recommended by the manufacturer.

• The amount of frost on the walls of the appliance

will be increased due to high level of humidity

from external environment or the frozen food is

not wrapped properly.

Maintenance

• Only a qualiﬁed technician and original spare

parts and accessories should be used to carry

out the repair and maintenance work. DO NOT

attempt to repair the appliance yourself.

Replacement of lamp

• Unplug the appliance from the main supply.

• Take out the lamp cover by loosing 2 screws.

• Unscrew the lamp bulb and replace with a new

one.

• Replace the cover.

Speciﬁcation of the lamp:

220-240V~ max. 2W, E14 cap

Note: Do not use a lamp more than 2W.

Screw driver (not supplied)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 233887 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info