Bedienungsanleitung Hendi 212134 (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Norwegisch)

741739

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Operation

• Clean the baking plate by a moist cloth before

ﬁrst time of using.

• Connect the power plug with a suitable electrical

outlet.

• Switch on the appliance with the ON/OFF switch,

it will light up. Then turn the temperature con-

trol knob clockwise to select the required baking

temperature.

• When the baking plate is heating up, the Orange

heating indicator light up.

• Wait 5 to 10 minutes for preheating. Once the set

temperature is reached, the Orange heating indi-

cator will go off automatically.

• Now it is ready for baking. Lightly coat the lower

baking plate with butter, margarine or suitable

baking oil. Then, spread the wafﬂe dough evenly

on the lower baking plates. Do not pour too much

tough.

• Close the lid by using the handle.

• Orange heating indicator lights up again for heat-

ing up. After about 2 ~ 4 minutes (time depends

on dough moisture, content, etc) Orange heat-

ing indicator will go off again. The wafﬂe is now

ready.

• Remove the wafﬂes using a wafﬂe fork (supplied).

Never use abrasive utensils. This may damage

the non-stick coating of the baking plates. Nev-

er use bare hands to touch the food. Danger of

burns!

Note: When you pour the batter onto the hot bak-

ing plate, you might hear some slight cracking

noise caused by difference in temperature. This

is normal.

• Close the appliance if more wafﬂes are to be

baked, in order to maintain the temperature.

• After use: set the Temperature control knob to

zero degree in upwards position until the Orange

heating indicator goes out.

Attention! Disconnect the power plug from the

electrical outlet and let it cool completely be-

fore cleaning and storing.

Note: Due to the manufacturing residues, the ap-

pliance may emit slight odor in the ﬁrst few cycles.

This is normal and does not indicate any defect or

hazard. Make sure the appliance is well ventilated

during operation.

RESET the Hi-limiter (thermal cut-out)

Please note that a RESET button located at the bot-

tom of the appliance.

• Unplug the appliance electrical power outlet.

• Allow the appliance to completely cool down.

• Press the RESET button of the Hi-limiter (ther-

mal cut-out). You should hear a click sound.

• Plug into the socket and you can use it again.

Cleaning and maintenance

Attention: Always unplug from the electrical power supply outlet and let it cool down completely before clean-

ing and storage.

Cleaning

• Never immerse the appliance in water or other

liquids.

• Clean the cooled exterior surface with a slightly

damp cloth or sponge with some mild soap solu-

tion.

• Never use abrasive sponges or detergents, steel

wool or metallic utensils to clean the interior or

exterior parts of the appliance.

Storage

• Before storage, always make sure the appliance

has already been disconnected from the electri-

cal outlet and cooled down completely.

• Store the appliance in a cool, clean and dry place.

• Never put heavy objects on the appliance as it

may damage the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 212134 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info