Bedienungsanleitung Hendi 233221 (Seite 6 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

742288

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Installation instructions

• Remove the appliance from the carton box, then

remove the external and internal packaging and

wrapping.

• Check to make sure the appliance is undamaged.

In case of incomplete delivery and damages, DO

NOT use the appliance. Please contact supplier

(See == > Warranty).

• Let the appliance stand upright for about 2 hours.

This is to reduce the malfunction of the cooling

system from improper handling during transpor-

tation.

• Clean interior surface with warm water and soft

cloth. (See == > Cleaning and Maintenance).

• Place the appliance on a horizontal, stable and

heat resist surface that is safe against water

splashes.

• Optimum working ambient temperature is be-

tween 16°C and 32°C. Otherwise, the functional-

ity will be limited.

• Ensure that there is sufﬁcient ventilation. Keep a

minimum distance of 10cm around the appliance.

Do not block the ventilation holes.

• For energy savings, always make sure the door

is closed.

Operation

The appliance is divided into 2 separate zones. The “UPPER ZONE“ and “LOWER ZONE“ of the appliance are

cotrolled independently with the use of the control panel (2).

Upper zone

U1 L1U2 L2U3 L3T1 S1

Lower zone

Temperature control and display

• Plug into a suitable electrical outlet, “888” will be

blinked for few seconds and beep sound will be

heard for the default factory setting.

• Then, temperature of the upper zone and lower

zone will be shown on the display (U2/L2).

• Next, set the temperature in either zone by press-

ing the “+” or “-“ key of button (U1/L1) [Range:

39°F (4°C) to 68°F(20°C)]. The zone temperature

has a tolerance of + / - 5°F (+/- 3°C) from setting

depending on number of stored bottles & ambi-

ent temperature conditions.

Switch ON/OFF

• Press and hold S1 button for 3 to 4 seconds to

switch ON / OFF the appliance.

• After switch OFF the appliance, both displays (U2

and L2) will become dark.

Interior lighting

• Press either U3 or L3 button to turn ON the light

of UPPER ZONE or LOWER ZONE of the appli-

ance correspondingly.

• Press again the U3 or L3 button to turn OFF the

light of UPPER ZONE or LOWER ZONE.

• The interior light will keep on lighting if it is not

pressed to turn OFF.

Temperature unit conversion

• The temperature display can be changed be-

tween Celsius (°C) and Fahrenheit (°F) by press-

ing the button (T1).

Key Lock mode

• If no button is touch within 15 seconds, then the

appliance will enter into “Key Lock” mode. Under

the “Key Lock” mode, the button has no response

unless you cancel the “Key Lock” mode.

• To cancel the “Key Lock” mode, press & hold

the U1 button (Press both “+” and “-“ keys at the

same time for few seconds). Then, the “Key Lock”

mode will then be cancelled.

Note: The door of the appliance can be locked at

the bottom (8) by the keys (Supplied)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 233221 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info