Bedienungsanleitung Hercules BOSCH Intuvia Pedelec Display 2021 (Seite 58 von 126) (Englisch)

761542

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

MY20H02-12_1.0_12.06.2019 58

Operation

The seat post quick release with clamping

lever (5) and setting bolt (4) in the open

position (1) and in the direction of the closed

position (2)

Set the seat post at the required height.

Figure 51: Detailed view of the seat post – examples of the

minimum insertion depth marking

To close it, push the seat post clamping lever as

far as it will go into the seat post.

Check the clamping force of quick releases.

6.3.2.2 Height-adjustable seat post

Only applies to pedelecs with this equipment

When using your seat post for the first time, you

must give it a firm push downwards to set it in

motion. This is due to the natural tendency of the

seal to repel oil from the seal surface. You only

need to do this before the first use or after a

longer period of non-use. Once you have

displaced the post through its deflection, the oil

spreads on the seal and the post begins to

function normally.

Figure 52: The seat post activation lever can be mounted

either on the left (1) or the right (2) side of the handlebars

Lowering the saddle

To lower the saddle, press your hand down on the

saddle or sit on the saddle. Press the seat post

activation lever and hold it down.

Release the lever once you have reached the

required height.

Raising the saddle

Pull the seat post activation level.

Remove any pressure on the saddle and

release the lever once you have reached the

required height.

6.3.2.3 Adjusting the seat position

The saddle can be shifted on the saddle frame.

The right horizontal position ensures an optimal

leverage position for legs. This prevents knee

pain and painful incorrect pelvis positions. If you

have displaced the saddle more than 10 mm, you

then need to adjust the saddle height again since

both settings affect one another.

To adjust the seat position safely, either push the

pedelec near to a wall, so that you can lean on the

wall to support yourself or ask another person to

hold the pedelec for you.

Climb onto the pedelec.

Place the pedals into the vertical position (3

o'clock position) with your feet.

The rider is sitting in the optimal sitting position

if the knee cap perpendicular line runs through

the pedal axle. If the perpendicular line crosses

behind the pedal, bring the saddle forward. If

the perpendicular line crosses in front of the

pedal, bring the saddle back. Move the saddle

Crash caused by an excessively high seat post

setting

A seat post with is set too high will cause the seat

post or the frame to break. This will cause a crash

with injuries.

Do not pull the seat post out of the frame

beyond the minimum insertion depth marking.

CAUTION

tiert w

se Position zur Be

aber in einem spätere

ochmals montieren.

Sie den mitgelieferten Winkel mit de

orrichtung und stecken Sie die Hülle in die

nvorrichtung.

der

Remotehebel

Oder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hercules BOSCH Intuvia Pedelec Display 2021 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hercules BOSCH Intuvia Pedelec Display 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info