Bedienungsanleitung Hercules DJ Control MP3 (Seite 8 von 18) (Englisch)

493445

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

8/18 – User Manual

a) Check that your sound card’s speaker mode is set to 4 channel or 5.1 channel.

b) Connect your headphones to the rear speakers plug on your sound card (black plug on

Sound Blaster Live!).

c) When you run VirtualDJ, activate headphone previewing by clicking on the

Headphones on 4.1 rear output (in the Settings/Sound Cards window).

You will need low impedance headphones for monitoring (less than 32 Ohms), as the sound level

will be too low if you use high impedance headphones. To monitor a deck, press and hold that

deck’s headphone monitoring button; monitoring stops as soon as you release the button. Make

sure to disable any 3D positioning features on your sound card, or else you may end up hearing

echoes of the track you are monitoring in your main mix!

When a piece on deck A is being played in the room, you should use your headphones to preview

the piece on deck B, and when a piece on deck B is being played in the room, you should press

the headphone monitoring button on deck A to prepare the next piece, and so on. The

corresponding LEDs next to the headphone monitoring buttons indicate whether the track is being

monitored on that deck: when the LED is lit up on your DJ Control MP3, that deck is being

monitored.

In VirtualDJ, the boxes in the upper middle part of the screen representing decks 1 and 2 reflect

your monitoring status: in the case below, deck A (the left-hand deck, or deck 1 in VirtualDJ) is

green, indicating that it is being monitored on your headphones, while deck B (the right-hand

deck, or deck 2 in Virtual DJ) is red, indicating that it is not being monitored.

5.4. Speeding up or slowing down a piece

The main reason for speeding up or slowing down a piece you are about to play is to match its

BPM and synchronize its beat with that of the piece already playing. In this way you can mix the

two pieces together smoothly when switching from one deck to another. There are two ways to

regulate the speed of a piece: by manually adjusting its pitch, and automatically via beat-

matching.

On vinyl decks, the pitch allows one to adjust the rotation speed of the turntable. This adjustment

therefore changes the speed of a piece by modifying its overall tonality (for example, a piece that

has been sped up significantly will sound much more high-pitched, or sharper).

You can therefore use one of the DJ Control MP3’s Pitch knobs to modify the pitch of a piece.

VirtualDJ also offers a very useful function to automatically match the BPM of pieces that are

playing and synchronize their beats for easy mixing: this function is called beat-matching. Press

the Master Tempo button on either deck to toggle beat-matching on and off for the deck in

question. When the corresponding LED lights up, beat-matching is enabled on that deck; when

the LED is off, beat-matching is disabled on that deck.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hercules DJ Control MP3 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hercules DJ Control MP3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info