Bedienungsanleitung Hercules DJControl AIR (Seite 2 von 7) (Englisch)

624511

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

MIXING TRACKS

Front panel: headphones

Use the following buttons to browse through folders and les.

Browse through

the list of folders

or through les:

Expand/collapse

a folder's tree

structure:

Access the list

of les in a folder:

DJUCED™ supports the most commonly-used audio le formats: mp3, wav, wma, aac, aif...

Rear panel: speakers

Mixing tracks means to link up songs, one after another, without any gaps or silences between them.

Previewing lets you prepare the next track to be played (following the track that you are currently

playing for your audience). You can use previewing to beatmatch the next track to be played, or

pause the track at a precise spot so that playback will start from this exact position. Or you can

place a Cue point, which will let you start playback of the track from that point (please also see

section 8 – PLACING A CUE POINT).

4.1 You have loaded a track onto each deck (A and B).

You start o by playing the track on deck A.

4.2

Set the crossfader to the side of the deck on

which the track is playing (here, to the left).

3.2

Before previewing the track on deck B, you must

rst completely lower the volume fader on deck B.

3.1

You are playing a track on deck A, and want to

preview the next track on deck B.

2.1 Browse to the location where your music les are stored on your computer.

3.8 Progressively move the crossfader to the deck B side, where the track that you just previewed is loaded.

3.5

Start playing the track to be previewed on deck B. Prepare the track (beatmatch

the track, place a Cue point...).

4.3

Press the button on the front panel. The sound

that will be played for your audience on the speakers

will be the same as the sound being played on your

headphones. Adjust the volume on your headphones

using the buttons.

4.5

To ensure a transition at the same tempo, synchronize

the BPM (number of beats per minute) of the track

that you are getting ready to play. Here, press the

button on deck B (1), so that the BPM value of

this track will match the BPM of the track that is

about to nish (on deck A). Or set the same BPM as

on Deck A using the pitch fader (2).

When there are 30 seconds remaining until the end

of the track, an alert is displayed to let you know

that it's time to get ready to play the next track.

4.4

Before the end of the track being played, start

playing the track loaded on deck B.

4.6

To make the transition, progressively move the

crossfader toward the deck on which the new track is

being played (here, to the right).

3.3 Press the button on deck B (the deck on which the track that you want to preview is loaded).

3.6 Synchronize the BPM (number of beats per minute) by pressing the button on deck B (1).

Or set the same BPM as on Deck A using the pitch fader (2).

3.7 When you're ready to play the track on deck B, progressively raise the volume fader on deck B.

PREVIEWING A TRACK

5.1 Press the button to enable Scratch mode.

5.2 Start playing a track loaded on deck A, for

example.

5.3 Place your hand on the jog wheel on deck A,

as shown in the illustration.

5.4 Press down slightly on the jog wheel...

5.5 ... and gently turn the jog wheel to the right and to the left, in succession.

2.2 After highlighting a track, press Load A to load the track on deck A, or press Load B to load the track on deck B.

DJUCED™ automatically analyzes the BPM (number of beats per minute) of the track you have loaded.

CONNECTING HEADPHONES AND SPEAKERS

LOADING YOUR MUSIC IN DJUCED™

3.4

Press the button before you start playing the track to be previewed. Since you have already set the

volume fader to the minimum, the track won't be heard by the audience – only by you, on your headphones.

Adjust the volume on your headphones using the buttons.

When connecting headphones, make sure that the volume level is

suitable for listening with headphones: start playing a music track

before putting on the headphones, and turn down the volume if it

seems that the sound coming from the headphones is too loud.

< 30s

Load B

Rec

Magic

SCRATCHING ON A TRACK

Rec

Magic

Rec

Magic

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hercules DJControl AIR Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hercules DJControl AIR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info