Bedienungsanleitung Hercules DJControl Jogvision (Seite 1 von 1) (Englisch)

624702

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

1 Touch-sensitive jog wheel

2 MODE (mode selection button +

mode LED indicators for pads

(1)

Press MODE button + pad 1/2/3/4

to switch to mode 1/2/3/4

3 1, 2, 3, 4: Pads 1 to 4 (HotCue and

samples [SHIFT+Pad: HotCue mode

= Erase the HotCue point / Sample

mode = Stop playback of sample]

4 SHIFT: Press to shift to alternate

function on some controls

(indicated in blue)

5 SYNC: Synchronization enabled on

corresponding deck [SYNC OFF:

Synchronization disabled]

6 CUE: Set Cue point and stop [ :

Return to beginning of track, or

beginning of previous track]

7 Play/pause [STUTTER: Return to

beginning of track]

8 Air control proximity sensor

9 Air control sensor VU meter

10 TREBLE, MEDIUM, BASS: 3-band

equalizer

11 BROWSER: Browse through lists/

folders/tracks [DECK GAIN: Gain per

deck] – Press: switch from a list to

the list to its right [SHIFT+press:

switch from a list to the list to its

left]

12 LOAD A: Load track on deck A /

FOLDER EXPAND: Expand or

collapse folder

13 LOAD B: Load track on deck B

14 CUE-SELECT: Toggle headphone

monitoring on/o for correspon-

ding deck

15 Deck volume fader and VU meter

16 BEATS: Track syncing VU meter

17 VINYL: Vinyl (Scratch) mode on/o

18 MIC: Microphone on/o

19 VIEW: Toggle between horizontal/

vertical display modes [PANEL:

Expand the FX or Sample menus]

20 LOAD PREPARE: Add the track to

the Prepare group (a group of

tracks being prepared) [AREA:

Display the Prepare group]

21 Crossfader

22 FX DRY > WET: Eects mode =

change amount of eect applied /

LOOP SIZE: Loop mode = change

loop size [BEATS: Beat multiplier,

used to adjust the eect]

23 LOOP ON: play a loop of the track

– LOOP x ½: Divide the loop by 2

– LOOP x 2: Double the loop

between 1 and 8 beats / FX1, FX2,

FX3: Enable eects [FX SELECT:

Select the eects assigned to the

FX1, FX2, FX3 buttons]

24 AIR FX: Enable/disable air control,

which controls a lter on the

corresponding deck [Manually tap

out a track’s tempo]

25 FX/LOOP MODE: Toggle buttons in

group 23 and rotary encoder (22)

between loop and eect modes

26 Deck pitch fader

27 MULTI FX: MULTI FX on = the rotary

encoder (22) modulates eects FX1,

FX2, FX3 / MULTI FX o = Single FX:

the rotary encoder (22) modulates

the FX1 eect

28 KEY-LOCK: Toggle Key Lock mode

on or o (maintains the same

musical key when changing the

pitch) / SLIP function

(2)

29 TRACK: Track status

(3)

30 Headphones volume

31 1/4”/6.35 mm + 1/8”/3.5 mm

headphones outputs (channels 3-4)

32 CUE (previewing) = listen on

headphones to the track loaded on

the deck selected with the

CUE-SELECT button (14) / MIX =

listen on headphones to the same

music being played out loud for

the audience

33 1/4”/6.35 mm mono microphone

input (channels 1-2) + gain control

34 Kensington® compatible lock

35 AUX IN: 1/8”/3.5 mm stereo

auxiliary input connector

36 BOOTH: Dual RCA outputs for

booth speakers (channels 1-2) +

volume control for the booth

output

37 MASTER: Dual RCA outputs +

1/8”/3.5 mm stereo master output

(channels 1-2)

38 USB port

39 Power supply connector

(1) Modes 3 (HotCue points 5-8) and 4 (sample

bank) are only featured in the Serato DJ software

(Serato DJ is an upgrade which can be

purchased), and not in the Serato DJ Intro

software (a license for which is included). In the

included Serato DJ Intro software, Mode 3

replicates Mode 1 (HotCue points 1-4), and Mode

4 replicates Mode 2 (samples).

(2) The SLIP function is only featured in the

Serato DJ software (Serato DJ is an upgrade

which can be purchased), and not in the included

Serato DJ Intro software. Using the SLIP function,

you can scratch, loop on a track etc. while this

button is held down: playback of the track is

suspended until you release the button, at which

point playback resumes where it would have

normally have been if the function had not been

applied.

(3) In Serato DJ Intro, the TRACK LED (29) lights

up to indicate that a track is being played. In

Serato DJ, the TRACK LED (29) shows the current

position in the track: green (rst half of the track),

then orange, red, and nally blinking red near

the end of the track.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hercules DJControl Jogvision Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hercules DJControl Jogvision

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info