624706
24
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
VirtualDJ 6 LE TC
7) SETTING THE PITCH
It’s the DJ’s job to provide the audience with music to dance to, which means:
- Selecting music tracks well-suited to the audience,
- Maintaining a dancing rhythm with a good ambiance, and avoiding anything which
might interrupt the rhythm, such as gaps in the music or noticeable changes in BPM,
- Making transitions between songs easy for dancers. You should always try to
synchronize the next track with the track currently playing, if possible: this
synchronization is called beat-matching.
Beat-matching consists of adjusting the playback speed of music track B until the moment the
beats (often marked by drums or bass) of this track B play at the same rhythm as the beats of
track A, to maintain the same beat during 3 steps:
- When playing track A,
- Then, when mixing track B together with track A, with the same rhythm,
- When you stop playback of track A and keep only track B playing, the dancers keep
the same dancing rhythm.
If the BPM rates of 2 music tracks are very far one from the other, you can synchronize them by
setting the BPM rate of the second music track at half or twice the BPM rate of the first music
track, so that the beat of the second music track is played at the same time as 1 beat out of 2 of
the first music track, or vice versa. Typically, you can synchronize a 75 BPM music track with
another track set at 75 BPM, or with a track set at 150 BPM.
a) Adjusting pitch in timecode mode
In timecode mode, you should not move the pitch faders with your mouse in the
VirtualDJ software: the only good way to change the pitch in timecode mode is to adjust the
pitch on your turntable or CD player itself.
In timecode mode, if you move the pitch fader in VirtualDJ with your mouse instead of using the
fader on your turntable or CD player, the position of the pitch fader in the VirtualDJ software will
not correspond to the position of the pitch fader on your physical device, which is very confusing
and should therefore be avoided.
Conversely, if you switch off timecode mode, you must use the pitch fader in the VirtualDJ
software, and not on your turntable or CD player.
b) Pitch scale
In VirtualDJ 6 LE TC, you can set a pitch scale of 6%, 8%, 10%, 12%, 20%, 25%, 33%, 50% or
100%.
User Manual – 24/30
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hercules VirtualDJ 6 LE TC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Hercules VirtualDJ 6 LE TC

Hercules VirtualDJ 6 LE TC Bedienungsanleitung - Deutsch - 30 seiten

Hercules VirtualDJ 6 LE TC Bedienungsanleitung - Holländisch - 30 seiten

Hercules VirtualDJ 6 LE TC Bedienungsanleitung - Französisch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info