Bedienungsanleitung HHB CDR-830 (Seite 20 von 44) (Englisch)

488783

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

4 Getting Started

Synchro recording won't work if

the source is already playing!

The recorder goes into all-sync

record pause and the

SYNC

indicator starts to blink.

SYNC–ALL

SYNC

CD-R

The display shows the all-track

sync mode, with the SYNC

indicator blinking to show that

recording can start.

4 Play the source.

The recorder starts recording

automatically.

5 After recording all tracks

from the source, the

recorder goes into record-

pause.

After the recorder encounters

about five seconds of continuous

silence, it assumes the end of the

source has been reached and

goes into record-pause and the

display shows the SYNC ALL

message again.

Be careful: If the recorder

detects another signal or start ID

(DAT or DCC) it will start

recording again!

• The recorder will enter record-

pause if the digital signal is

interrupted for more than 5

seconds—see

Digital signal

interruptions

on page 18.

6 Press

7 to finish recording.

After pressing 7, the display

shows PMA REC while it records

the track information to the disc.

Note: If you find that synchro

recording does not seem to work,

see the troubleshooting section

on pages 40-42 for possible

remedies.

ENTER

CURSOR

MENU/

DELETE

TEXTMARK

SET

CLEAR

TITLE

/MODE

¡

¢

ABC DEF

GHI MNOJKL

PQRS TUV WXYZ

REC SYNCHRO

REPEAT RANDOM NAME CLIP

NPUT

SELECTER

FADER

SKIP PLAY

COMPACT DISC RECORDER

REMOTE CONTROL UNIT

SKIP ID

PROGRAM CHECK CLEAR

AUTO /

MANUAL

123

10/0 >10

SCROLL

DISPLAY

•

Recording all

tracks from a

source

If you want to copy all the tracks

from a source, use this mode. Like

the 1-track synchro recording

mode, the recorder starts and

stops automatically. When

recording from MD or CD, you can

play the source in either normal

play mode, or program play if you’d

like the recorded tracks in a

different order to the original. We

do not recommend recording from

a DAT in program play mode—use

the 1-track synchro recording

mode if you want to record the

tracks in a different order.

If you are recording from a noisy

analog source, such as an old

recording, or from a source with

long quiet sections, the recorder

may not recognize the end of

tracks. In this case, you can still use

this mode, but it may be better to

use manual track numbering (see

page 33).

1 Load a CD-R or CD-RW

disc.

Check the display to make sure

that there's enough space on the

disc for what you want to record.

2 Press INPUT SELECTOR to

choose an input.

Pressing

INPUT

SELECTOR

repeatedly

switches the active input:

Analog - Optical - Coaxial

The recorder's display indicates

the current input.

3 Make sure that the source

is not playing, then press

SYNCHRO twice.

Press SYNCHRO repeatedly to

change the recording mode and

select SYNC-ALL.

DIGITAL

REC LEVEL

ANALOG

REC LEVEL

MENU/

DELETE

TEXT

SYNCHRO

PROFESSIONAL

MONITOR

INPUT

SELECTOR

AUTO

MANUAL

TITLE/MODE

TRACK NO.

WRITE

DISPLAY

FINALIZEERASE

SCROLL

CD TEXT

SYNC–1

SYNC-1

SYNC–ALL

SYNC

SYNC–FINAL

SYNC

CD-R

O1 O1 OO:OO

FINALIZE

CD-R

1-track sync

All-track sync

w/ finalization

Record-pause

(no sync)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HHB CDR-830 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info