Bedienungsanleitung Hifonics TRX6006 DSP (Seite 29 von 40) (Deutsch, Englisch)

700123

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

FUNCTIONAL INSTRUCTIONS

2. SOURCE:

• Here you can choose between the different input sources SPDIF (optical input), MAIN (RCA audio inputs), AUX (RCA stereo input).

WiFi is currently not supported.

3. CH-SETTING:

• Here you select the particular output channels or output channel pairs in which you want to change the settings.

You have the option to link the respective channel pairs for L and R with the lock symbol in the middle to synchronize the settings for

both channels. With L-> R COPY you can also copy the setting of the currently selected left channel to the right channel.

4. CROSSOVER:

• Here you can select the required lter type (FILTER TYPE OFF, HP, BP or LP)

and set under FREQUENCY the desired cut-off frequency. The sliders only work

when the particular lter type is activated. As soon a lter type is selected, it will be

displayed graphically under point 8.

Note: If you have selected a lter type, the cut-off frequency can also be changed

under point 8 with the mouse. Click and hold the red dot and move the cursor to

the desired location on the frequency band.

• Hint: Instead of using the slider, you can also type in the cut-off frequency directly

with the keyboard after a double click on the values below FREQUENCY.

Conrm by pressing ENTER.

5. GAIN:

• Here you can reduce the level of the individual Outputs A – H from 0dB to -40dB. With MUTE you can mute the respective channel.

If necessary, you can use MUTE under MAIN to mute all output channels.

• In addition, under MAIN, the total output level of the DSP amplier (-40dB to + 12dB) can be adjusted.

Attention: Use this control with caution. Too loud level could seriously damage your speakers.

6. DELAY:

• Here you can adjust the time delay and phase shift of the individual Outputs A – H. For each output channel channel you can individ-

ually set the time delay of the signal under DELAY. Above PHASE, the unit of delay can be switched between ms (milliseconds) and

cm (centimeters).

Hint: Instead of using the slider, you can also type in the value directly with the keyboard after a double click on the values above the

sliders. Conrm by pressing ENTER.

• Below the sliders you can switch the phase from 0° to 180 ° individually for each channel.

• With these two functions you can match your sound system to the vehicle acoustics and adjust the acoustic stage perfectly.

7. HP SLOPE / LP SLOPE - CONFIGURATION OF SLOPE:

• Select under HP/SLOPE the desired slope of the high-pass lter and under LP/SLOPE the slope of the low-pass lter, which is se-

lectable in 6dB steps, starting from 6 dB per octave (very at) to 48 dB per octave (very steep).

Note: The HP/SLOPE or LP/SLOPE control panel is inactive (gray), if under 4. CROSSOVER HP, LP and BP is not selected.

8. FREQUENCY BAND PREVIEW:

• The frequency band shows graphically the envelope of the 31-band equalizer (point 9) and the currently selected settings of the

output channel or output channel pair from point 3.

9. 31-BAND EQUALIZER:

• With the sliders below you can set the desired dB value (-18 to +12) between 20 Hz to 20000 Hz for each output channel (except

subwoofer channels G & H: 11-band equalizer 20 Hz - 200 Hz).

Below the individual sliders you can enter the Q (quality) as numeric value (0.5 for very shallow to 9 for very steep).

With ByPass you can switch off the Equalizer function.

Press the RESET button to reset all Equalizer settings to default (All other settings are not affected by this).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hifonics TRX6006 DSP Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info