Bedienungsanleitung Hikoki CB3612DA (Seite 11 von 332) (Alle Sprachen)

816321

Zoom out

Zoom in

Vorherige Seite

1/332

Nächste Seite

English

10. Do not immerse the battery or allow any ﬂ uids to ﬂ ow

inside. Conductive liquid ingress, such as water, can

cause damage resulting in ﬁ re or explosion. Store your

battery in a cool, dry place, away from combustible and

ﬂ ammable items. Corrosive gas atmospheres must be

avoided.

CAUTION

1. If liquid leaking from the battery gets into your eyes,

do not rub your eyes and wash them well with fresh

clean water such as tap water and contact a doctor

immediately.

If left untreated, the liquid may cause eye-problems.

2. If liquid leaks onto your skin or clothes, wash well with

clean water such as tap water immediately.

There is a possibility that this can cause skin irritation.

3. If you ﬁ nd rust, foul odor, overheating, discolor,

deformation, and/or other irregularities when using the

battery for the ﬁ rst time, do not use and return it to your

supplier or vendor.

WARNING

If a conductive foreign matter enters in the terminal of lithium

ion battery, the battery may be shorted, causing ﬁ re. When

storing the lithium ion battery, obey surely the rules of

following contents.

○ Do not place conductive debris, nail and wires such as

iron wire and copper wire in the storage case.

○ To prevent shorting from occurring, load the battery in

the tool or insert securely the battery cover for storing

until the ventilator is not seen.

REGARDING LITHIUM-ION BATTERY

TRANSPORTATION

When transporting a lithium-ion battery, please observe the

following precautions.

WARNING

Notify the transporting company that a package contains a

lithium-ion battery, inform the company of its power output

and follow the instructions of the transportation company

when arranging transport.

○ Lithium-ion batteries that exceed a power output of

100 Wh are considered to be in the freight classiﬁ cation

of Dangerous Goods and will require special application

procedures.

○ For transportation abroad, you must comply with

international law and the rules and regulations of the

destination country.

Power Output

2 to 3 digit number

NAMES OF PARTS (Fig. 1–Fig. 20)

Battery

Front handle

Dial for setting band saw blade circumferential

speed

Pulley guard (B)

Tension lever

Band saw blade

Guide plate

Duster plate

Pulley guard (A)

Handle

Switch

Switch lock

Housing

Motor (built-in)

Hook

Blade pulley cover (A)

Guide rollers

Blade pulley cover (B)

Hex. bar wrench

Pulley guard (C)

Name plate

LED light

Latch

Charge indicator lamp

M8 bolt

Bearing holder (B)

Loosen

Tighten

M6 ﬂ at-head screw

Guide plate (normal working position)

Holder plate (A)

M8 hex-socket set screw

Blade pulley (A)

Blade pulley (B)

Direction of rotation

Bearing holder

Tab

Workpiece

Blade pulley rubber

Band saw blade back ball bearing support

00BookCB3612DA.indb1100BookCB3612DA.indb11 2022/07/0116:48:392022/07/0116:48:39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikoki CB3612DA Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info