Bedienungsanleitung Hikoki CG18DA (Seite 12 von 380) (Alle Sprachen)

816209

Zoom out

Zoom in

Vorherige Seite

1/380

Nächste Seite

English

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may affect the power toolʼs operation. If

damaged, have the power tool repaired before

use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

Use of the power tool for operations different from

those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease.

Slippery handles and grasping surfaces do not allow

for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specified by the

manufacturer.

A charger that is suitable for one type of battery

pack may create a risk of fire when used with

another battery pack.

b) Use power tools only with specifically

designated battery packs.

Use of any other battery packs may create a risk of

injury and fire.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If

contact accidentally occurs, flush with water. If

liquid contacts eyes, additionally seek medical

help.

Liquid ejected from the battery may cause irritation

or burns.

e) Do not use a battery pack or tool that is

damaged or modified.

Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion

or risk of injury.

f) Do not expose a battery pack or tool to fire or

excessive temperature.

Exposure to fire or temperature above 130°C may

cause explosion.

g) Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specified in the instructions.

Charging improperly or at temperatures outside the

specified range may damage the battery and

increase the risk of fire.

6) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

b) Never service damaged battery packs.

Service of battery packs should only be performed

by the manufacturer or authorized service providers.

PRECAUTION

Keep children and infirm persons away.

When not in use, tools should be stored out of reach

of children and infirm persons.

CORDLESS BRUSH CUTTER SAFETY

WARNINGS

a) Do not use the machine in bad weather conditions,

especially when there is a risk of lightning.

This decreases the risk of being struck by lightning.

b) Thoroughly inspect the area for wildlife where the

machine is to be used.

Wildlife may be injured by the machine during

operation.

c) Thoroughly inspect the area where the machine is

to be used and remove all stones, sticks, wires,

bones, and other foreign objects.

Thrown objects can cause personal injury.

d) Before using the machine, always visually inspect

to see that the cutter or blade and the cutter or

blade assembly are not damaged.

Damaged parts increase the risk of injury.

e) Follow instructions for changing accessories.

Improperly tightened blade securing nuts or bolts may

either damage the blade or result in it becoming

detached.

f) The rated rotational speed of the blade must be at

least equal to the maximum rotational speed

marked on the machine.

Blades running faster than their rated rotational speed

can break and fly apart.

g) Wear eye, ear, head and hand protection.

Adequate protective equipment will reduce personal

injury by flying debris or accidental contact with the

cutting line or blade.

h) While operating the machine, always wear nonslip

and protective footwear. Do not operate the

machine when barefoot or wearing open sandals.

This reduces the chance of injury to the feet from

contact with the moving cutters or lines.

i) While operating the machine, always wear safety

footwear. Do not operate the machine when

barefoot or wearing open sandals.

This reduces the chance of injury to the feet from

contact with a moving cutter, line or blade.

j) While operating the machine, always wear long

trousers.

Exposed skin increases the likelihood of injury from

thrown objects.

k) Keep bystanders away while operating the

machine.

Thrown debris can result in serious personal injury.

l) Always use two hands when operating the

machine.

Holding the machine with both hands will avoid loss of

control. (Fig.2)

m) Hold the machine by the insulated gripping

surfaces only, because the cutting line or blade

may contact hidden wiring.

Cutting line or blades contacting a "live" wire may make

exposed metal parts of the machine "live" and could

give the operator an electric shock.

n) Always keep proper footing and operate the

machine only when standing on the ground.

Slippery or unstable surfaces may cause a loss of

balance or control of the machine.

2023/09/08 13:57:15Stylesheet: EU Version: 2023.8.18

CG18DA(L)_C99750571_311_EU

Hikoki CG18DA Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info