Bedienungsanleitung Hikoki CJ160VA (Seite 4 von 124) (Alle Sprachen)

816397

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

English

Switching ON

Switching OFF

Disconnect mains plug from electrical outlet

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the

accessories listed in the below.

○ Blades (No. 41, No. 123X) ..................................1 each

No. 41: Refer to Table 1

No. 123X: Mild steel plate 1.5 – 10 mm

○ Sub base .......................................................................1

○ Hexagon bar wrench .....................................................1

○ Splinter guard................................................................1

○ Dust collector ................................................................1

○ Chip cover .....................................................................1

Standard accessories are subject to change without notice.

APPLICATIONS

○ Cutting various lumber and pocket cutting

○ Cutting mild steel plate, aluminum plate, and copper

plate

○ Cutting synthetic resins, such as phenol resin and vinyl

chloride

○ Cutting thin and soft construction materials

○ Cutting stainless steel plate (with No. 97 blade)

SPECIFICATIONS

Voltage (by areas)*1

(110 V, 120 V, 220 V, 230 V,

240 V)

Power Input*1 800 W

Max. cutting depth Wood 160 mm

Mild steel 10 mm

No-load speed*1 800 – 2800 min-1

Stroke 26 mm

Min. cutting radius 25 mm

Weight*2 2.7 kg (CJ160V),

2.6 kg (CJ160VA)

*1 Be sure to check the nameplate on product as it is

subject to change by areas.

*2 Weight: According to EPTA-Procedure 01/2014

NOTE

Due to HiKOKI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

MOUNTING AND OPERATION

Action Figure Page

Changing blades 2 113

Adjusting the blade operating

speed*1 3113

Switch operation 4 114

How to use the LED light 5 114

Adjusting the orbital operation 6 114

Splinter guard 7 114

Sub base*2 8 115

Chip cover 9 115

Housing the hexagonal bar wrench 10 115

Mounting the guide 11 115

Rectilinear cutting 12 115

Cutting a circle or a circular arc 13 115

Cutting metallic materials 14 116

Angular cutting 15 116

Pocket cutting 16 116

Concerning cutting of stainless steel

plates 17 117

Connecting with cleaner 18 117

Selecting accessories ―118

*1 The tool is equipped with two modes: “Standard Mode”

and “AUTO Mode”.

(1) Standard Mode

You can change the blade operating speed between

800 to 2800 min-1 by adjusting the dial from “1” to “5”.

(2) AUTO Mode

Depending on the workload, AUTO Mode “A” will

automatically change the blade operating speed

to 1400 min-1 or 2800 min-1. This has the eﬀ ect of

lowering vibration and noise prior to and during

operation.

Adjust the dial for the mode and speed that best suits

your task conditions and materials.

Blade operating speed

Mode Dial Blade operating speed

Standard Mode 1 – 5 800 – 2800 min-1

AUTO Mode A No load: 1400 min-1

With load: 2800 min-1

With AUTO Mode, the vibration frequency may not

reach 2800 min-1 or return to 1400 min-1 depending on

variables such as the type of work.

NOTE*2

When the sub base is attached, the blade’s protrusion

from the material being cut will be reduced by 3mm. When

the blade has been moved down to the lowest point,

check to make sure that it is protruding from the material.

SELECTION OF BLADES

Accessory blades

To ensure maximum operating eﬃ ciency and results, it is

very important to select the appropriate blade best suited to

the type and thickness of the material to be cut. Three types

of blades are provided as standard accessories. The blade

number is engraved in the vicinity of the mounting portion

of each blade. Select appropriate blades by referring to

Table 1.

0000BookCJ160V.indb40000BookCJ160V.indb4 2022/02/0114:38:202022/02/0114:38:20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikoki CJ160VA Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info