Bedienungsanleitung Hikoki DH24PG2 (Seite 4 von 108) (Alle Sprachen)

816301

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

English

n0No-load speed

Bpm Full-load impact rate

max Drilling diameter, max.

kg Weight

(According to EPTA-Procedure 01/2014)

Concrete

Steel

Wood

Rotation and hammering function

Rotation only function

Hammering only function

Switching ON

Switching OFF

Disconnect mains plug from electrical outlet

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package

contains the accessories listed in the below.

○ Plastic case ................................................................ 1

○ Side handle ................................................................. 1

○ Depth gauge .............................................................. 1

○ Drill chuck holder (DH28PMY2 only) .......................... 1

Standard accessories are subject to change without notice.

APPLICATIONS

Rotation and hammering function

○ Drilling anchor holes

○ Drilling holes in concrete

○ Drilling holes in tile

Rotation only function

○ Drilling in steel or wood

(with optional accessories)

○ Tightening machine screws, wood screws

(with optional accessories)

Hammering only function

(DH24PH2, DH26PC2, DH28PCY2, DH28PMY2)

○ Light-duty chiselling of concrete, groove digging and

edging.

SPECIFICATIONS

The speciﬁ cations of this machine are listed in the Table on

page 95.

NOTE

Due to HiKOKI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

MOUNTING AND OPERATION

Action Figure Page

Inserting SDS-plus tools 1 96

Removing SDS-plus tools 2 96

Selecting rotation direction 3 96

Selecting the operating mode 4 96

Adjusting the drilling depth 5 96

Changing the chisel position 6 96

Removing the quick release chuck

(DH28PMY2)*1797

Inserting the quick release chuck

(DH28PMY2) 897

Inserting round shank applications

tools (DH28PMY2) 997

Switching on and oﬀ and setting

the speed 10 97

Locking-on the On / Oﬀ switch 11 97

Releasing the On / Oﬀ switch 12 97

Installing the side handle 14 98

Selecting accessories*2–

99, 100

*1 If it is hard to pull out the drill chuck holder or the drill bit

holder, align the change lever with the mark and turn

the lock grip.

*2 For detailed information regarding each tool, contact a

HiKOKI authorized service center.

LUBRICATION

This Rotary Hammer is of full air-tight construction to protect

against dust.

Therefore, this Rotary Hammer can be used without

lubrication for long periods. Replace the grease whenever

you change the carbon brush to maintain the service life.

Further use of the rotary hammer with lock oﬀ grease will

cause the machine to seize up reduce the service life.

CAUTION

A special grease is used with this machine, therefore,

the normal performance of the machine may be badly

aﬀ ected by use of other grease. Please be sure to let

one of our service agents undertake replacement of the

grease.

MAINTENANCE AND INSPECTION

1. Inspecting the tools

Since use of a dull tool will cause motor malfunctioning

and degraded eﬃ ciency, replace the tool with new ones

or resharpen them without delay when abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws be

loose, retighten them immediately. Failure to do so could

result in serious hazard.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the power

tool.

Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

4. Inspecting the carbon brushes

For your continued safety and electrical shock

protection, carbon brush inspection and replacement on

this machine should ONLY be performed by a HiKOKI

Authorized Service Center.

00BookDH24PG2.indb400BookDH24PG2.indb4 2022/12/2214:08:282022/12/2214:08:28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikoki DH24PG2 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info