Bedienungsanleitung Hikoki DS10DAL (Seite 5 von 156) (Alle Sprachen)

816348

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

English

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

DS10DAL: Cordless Driver Drill

To reduce the risk of injury, user must read

instruction manual.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2012/19/EU

on waste electrical and electronic equipment

and its implementation in accordance with

national law, electric tools that have reached

the end of their life must be collected separately

and returned to an environmentally compatible

recycling facility.

kg Weight*

(According to EPTA-Procedure 01/2014)

Drill mark

Switching ON

Switching OFF

Change rotation speed - High speed

Change rotation speed - Low speed

Clockwise rotation

Counterclockwise rotation

* Depending on attached battery. The heaviest weight is

measured with BCL1030 (sold separately).

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the

accessories listed on page 144.

Standard accessories are subject to change without notice.

APPLICATIONS

○ Driving and removing of machine screws, wood screws,

tapping screws, etc.

○ Drilling of various metals

○ Drilling of various woods

SPECIFICATIONS

Model DS10DAL

No-load speed (Low / High) 0 – 350 / 0 – 1300 min-1

Capacity

Drilling

Wood (Thickness 18 mm) 29 mm

Metal (Thickness 1.6 mm) Steel: 10 mm

Aluminum: 12 mm

Driving

Machine screw 6 mm

Wood screw 5.8 mm (diameter) × 45 mm (length)

(Requires a pilot hole)

Rechargeable battery

BCL1015S: Li-ion 10.8 V (1.3 Ah 3 cells)

BCL1015: Li-ion 10.8 V (1.5 Ah 3 cells)

BCL1030: Li-ion 10.8 V (3.0 Ah 6 cells)

Weight

1.0 – 1.2 kg

Model UC10SL2

Charging voltage 10.8 V

Weight 0.35 kg

NOTE

Due to HiKOKI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

CHARGING

Before using the power tool, charge the battery as follows.

1. Connect the charger’s power cord to the receptacle.

When connecting the plug of the charger to a receptacle,

the pilot lamp will blink in red (At 1-second intervals).

2. Insert the battery into the charger.

Firmly insert the battery into the charger till it contacts the

bottom of the charger as shown in Fig. 2.

3. Charging

When inserting a battery in the charger, the pilot lamp

will light up continuously in red.

When the battery becomes fully recharged, the

pilot lamp will blink in red (At 1-second intervals).

(See Table 1)

(1) Pilot lamp indication

The indications of the pilot lamp will be as shown in

Table 1, according to the condition of the charger or the

rechargeable battery.

0000BookDS10DAL.indb50000BookDS10DAL.indb5 2022/10/1823:15:452022/10/1823:15:45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikoki DS10DAL Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info