Bedienungsanleitung Hikoki DV22V (Seite 4 von 104) (Alle Sprachen)

816299

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

English

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

DV22V: Impact Drill

To reduce the risk of injury, user must read

instruction manual.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2012/19/EU

on waste electrical and electronic equipment

and its implementation in accordance with

national law, electric tools that have reached

the end of their life must be collected separately

and returned to an environmentally compatible

recycling facility.

VRated voltage

PPower Input

n0No-load speed

Rotation only function

Rotation and impact function

Concrete

Switching ON

Switching OFF

On / Oﬀ switch lock-on

Change rotation speed - High speed

Change rotation speed - Low speed

Clockwise rotation

Counterclockwise rotation

Disconnect mains plug from electrical outlet

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package

contains the accessories listed in the below.

(1) Chuck wrench (Spec. only for keyed chuck) ................1

(2) Side handle ..................................................................1

(3) Depth gauge ................................................................1

(4) Plastic case ..................................................................1

Standard accessories are subject to change without notice.

APPLICATIONS

○ By combined actions of ROTATION and IMPACT:

Boring holes in hard materials (concrete, marble, granite,

tiles, etc.)

○ By ROTATIONAL action:

Boring holes in metal, wood and plastic.

SPECIFICATIONS

Voltage*1(110 V, 220 V, 230 V, 240 V)

Power input 1120 W*1

Speed range 1 2

No load speed 0 – 1100 min-1 0 – 3000 min-1

Capacity

Steel 16 mm 8 mm

Concrete 22 mm 13 mm

Wood 40 mm 25 mm

Full-load impact rate 8100 min-1 22000 min-1

Weight*23.0 kg

*1 Be sure to check the nameplate on product as it is subject

to change by areas.

*2 Weight: According to EPTA-Procedure 01/2014

NOTE

Due to HiKOKI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

MOUNTING AND OPERATION

Action Figure Page

Insulated gripping surface 1 94

Fixing and removing side handle

294

Using depth stopper 3 94

Mounting and dismounting of

the bit 494

Selecting rotation direction 5 95

Selecting the operating mode 6 95

Switch operation 7 95

Locking-on the switch 8 95

Releasing the switch 9 95

Change rotation speed 10 96

Selecting accessories ―97

Selecting the appropriate drill bit

○ When boring concrete or stone

Use the drill bits speciﬁ ed in the Optional Accessories.

○ When boring metal or plastic

Use an ordinary metalworking drill bit.

○ When boring wood

Use ordinary woodworking drill bit.

However, when drilling 6.5 mm or smaller holes, use a

metalworking drill bit.

0000BookDV22V.indb40000BookDV22V.indb4 2022/12/2715:19:272022/12/2715:19:27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikoki DV22V Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info