816272

Hikoki RP18DA Seite 12

12
Zoom out
Zoom in
Vorherige Seite
1/228
Nächste Seite
12
English
CLEANING
1 General Cleaning Instructions
WARNING
Turn off the power switch and remove the battery
before cleaning the device.
Clean the tank and accessories with water. Wipe the
upper part with a damp cloth.
CAUTION
Discharge and maintenance operations (including
disposal of the dust collection tanks) must only be
carried out by qualifi ed specialists wearing appropriate
protective clothing and equipment.
Emptying the Tank
WARNING
For dust class only permitted for dusts with
occupational exposure limits > 1mg/m3.
(1) Set the switch to position “0”
(2) Remove battery.
(3) Open the clamps. Remove the upper part of the device
from the tank.
(4) Tip out the tank.
Disposing of the Dust Bag
(1) Set the switch to position “0”
(2) Remove battery.
(3) Open the clamps. Remove the upper part of the device
from the tank.
(4) Carefully remove the dust bag.
(5) Be careful with dust during disposal!
(6) Dispose of the vacuumed material in accordance with
legal regulations.
Clean the fi lter via PressClean (Fig. 8)
- Clean the fi lter according to “2 PressClean” of “THE
DEVICE”
Clean the fi lter manually (Fig. 9)
- Remove the fi lter according to “2. Replacing the fi lter”
of “MAINTENANCE AND INSPECTION”
- Occasionally tap the fi lter to remove any dust that has
gathered on it. If the fi lter is very dirty, you can clean it
with water and a soft brush.
Allow to fi lter to dry properly afterwards.
MAINTENANCE AND INSPECTION
WARNING
○ For inspection and maintenance, be sure to turn off the
switch and disconnect the battery.
○ Do not work with wet hands. May cause electric shock
or injuries.
1. General instructions
Clean the device (see “CLEANING”).
WARNING
For maintenance by the user, the vacuum cleaner must
be taken apart, cleaned and maintained, to the extent
possible, without endangering maintenance staff or other
people.
Preventive measures
Appropriate preventive measures include: cleaning the
device before disassembly; providing local fi ltered forced
ventilation where the vacuum cleaner is disassembled;
cleaning of the maintenance area and providing suitable
personal protective clothing and equipment.
When carrying out maintenance or repairs, it is essential
to dispose of any contaminated objects that cannot be
adequately cleaned. These objects must be disposed
of using impermeable bags and in accordance with the
applicable regulations for removing such waste.
2. Replacing the fi lter
(1) Clean the fi lter again before replacement
(“2 PressClean” of “THE DEVICE”)
(2) Set the switch to position “0”
Remove battery.
(3) Open the clamps. Remove the upper part of the device
from the tank.
(4) Unscrew the screws on the bottom of the upper part
(see Fig. 9) so that the fi lter and fi lter bracket can be
removed.
(5) Seal the removed fi lter immediately in a dust-tight
plastic bag and dispose of it in accordance with
regulations.
(6) Insert a new fi lter into the fi lter holder and use the screw
to attach it in the vacuum once again. Ensure proper
and secure position.
3. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws
be loose, retighten them immediately. Failure to do so
could result in serious hazard.
4. Maintenance of the motor
The motor unit winding is the very “heart” of the power
tool.
Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
5. Inspection of terminals (tool and battery)
Check to make sure that swarf and dust have not
collected on the terminals.
On occasion check prior, during and after operation.
CAUTION
Remove any swarf or dust which may have collected on
the terminals.
Failure to do so may result in malfunction.
6. Check for Dust
Dust may be removed with a soft cloth or a cloth
dampened with soapy water. Do not use bleach,
chlorine, gasoline or thinner, for they may damage the
plastics.
7. Storage
Store the power tool and battery in a place in which
the temperature is less than 40°C and out of reach of
children.
NOTE
Storing lithium-ion batteries.
Make sure the lithium-ion batteries have been fully
charged before storing them.
Prolonged storage (3 months or more) of batteries with
a low charge may result in performance deterioration,
signifi cantly reducing battery usage time or rendering
the batteries incapable of holding a charge.
However, signifi cantly reduced battery usage time may
be recovered by repeatedly charging and using the
batteries two to fi ve times.
If the battery usage time is extremely short despite
repeated charging and use, consider the batteries
dead and purchase new batteries.
CAUTION
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
000BookRP18DAEU.indb12000BookRP18DAEU.indb12 2023/07/1917:13:112023/07/1917:13:11
… 12 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hikoki RP18DA wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info