Bedienungsanleitung Hikoki UB18DD (Seite 7 von 156) (Alle Sprachen)

816277

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

English

0,5m Keep the light and the object being illuminated

at least 0.5 m apart.

Switching ON

Switching OFF

Warning

V volts

A amperes

Hz hertz

W watts

ta ambient temperature

IPXX IP symbol

Class II tool

APPLICATIONS

Illumination of work site

SPECIFICATIONS

Model UB18DD

Voltage 18 V

LED (white) ×216

Brightness

adjustment range 1000–10000 lm

Operating

time

(Using full

charged

battery)

10000 lm 3.0 Ah: Approximatery 0.6 hours

5.0 Ah: Approximatery 1.1 hours

8.0 Ah: Approximatery 1.8 hours

1000 lm 3.0 Ah: Approximatery 5.5 hours

5.0 Ah: Approximatery 9 hours

8.0 Ah: Approximatery 14.5 hours

Battery available for

this tool*1Multi volt battery, BSL18 Series

Weight*24.7 kg (BSL1830C) (with AC cord)

5.3 kg (BSL36B18) (with AC cord)

*1 Existing batteries (BSL3660/3620/3626, etc.) cannot be

used with this tool.

*2 According to EPTA-Procedure 01/2014

NOTE

Due to HiKOKI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

CHARGING

Before using the tool, charge the battery as follows.

1. Connect the charger’s power cord to the receptacle.

When connecting the plug of the charger to a receptacle,

the pilot lamp will blink in red (At 1- second intervals).

2. Insert the battery into the charger.

Firmly insert the battery into the charger as shown in

Fig. 4.

3. Charging

When inserting a battery in the charger, charging will

commence and the pilot lamp will light continuously in

red.

When the battery becomes fully recharged, the pilot lamp

will blink in red. (At 1-second intervals) (See Table 1)

● Pilot lamp indication

The indications of the pilot lamp will be as shown in

Table 1, according to the condition of the charger or the

rechargeable battery. Table 1

Indications of the pilot lamp (RED)

Before

charging

Lights on for

0.5 seconds and oﬀ

for 0.5 seconds

(Blinks)

Plugged into power

source

While

charging

Lights continuously

(Lights) —

Charging

complete

Lights on for

0.5 seconds and oﬀ

for 0.5 seconds

(Blinks) —

Overheat

standby

Lights on for

1 second and oﬀ for

0.5 seconds

(Blinks)

Battery overheated.

Unable to charge.

(Charging will

commence when

battery cools)

Charging

impossible

Lights on for

0.1 seconds and oﬀ

for 0.1 seconds

(Flickers)

Malfunction in

the battery or the

charger

● Regarding the temperatures and charging time of the

battery.

The temperatures and charging time will become as

shown in Table 2.

Table 2

Charger

Battery UC18YFSL

Charging voltage V 14.4–18

Weight kg 0.5

Temperatures at which the battery

can be recharged 0°C–50°C

Charging time for battery capacity,

approx. (At 20°C)

1.5 Ah

2.0 Ah

2.5 Ah

3.0 Ah

4.0 Ah

5.0 Ah

6.0 Ah

8.0 Ah

min

120

Number of battery cells 4–10

NOTE

The recharging time may vary according to temperature

and power source voltage.

00BookUB18DD.indb700BookUB18DD.indb7 2023/05/2510:31:562023/05/2510:31:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikoki UB18DD Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info