Bedienungsanleitung Hikvision DS-7208HVI-S (Seite 49 von 65) (Englisch)

629327

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Hikvision EURO, Inc. – DS-7208&7216HVI-S Series Embedded Net DVR User Manual

3. Select the alarm input to configure in the Alarm Input No. drop down menu on the upper left of the menu.

If all alarm inputs are to be configured with the same settings, select All from the list.

4. Select the Trigger Action for the external alarm input device. Normal Open or Normal Close can be selected.

5. Select the PTZ Actions (only if a PTZ camera is configured on the DVR) to run when the alarm input is

triggered. Only one PTZ action can be selected per alarm input.

6. Select the Actions to run when the alarm input is triggered. Multiple actions can be selected per alarm input.

The action available includes:

• Sound Audio Warning: DVR will sound an audio warning if alarm is triggered.

• Pop-up Image on Monitor: DVR will show the corresponding channel that is associated with the trigger

input.

• Notify Surveillance Center: DVR will notify surveillance center when alarm is triggered.

• Send Email: DVR will send an email out to the designated recipients when alarm is triggered.

• Trigger Alarm Output: DVR will trigger alarm output when input is triggered. Selecting this option will

enable the Alarm Output list, where the output to trigger can be selected.

7. Select the Save button to save the trigger settings and select Exit to return to the previous menu. Selecting

the Exit button without clicking Save will quit out of the menu without saving settings.

Configuring Exceptions

Actions can also be triggered when the DVR detects certain exceptions. To setup exception configuration:

1. Enter the Exception Configuration menu, shown in Figure 45 by going to Main Menu > System

Configuration > Exception Configuration.

Figure 45. Exception Configuration Menu

2. Select the Exception Type to configure. The exception type includes:

• HDD Full: If selected, trigger action when HDD is full.

• HDD Error: If selected, trigger action when errors on the HDD are detected.

• Network Failure: If selected, trigger action when a network failure is detected.

• IP Conflict: If selected, trigger action if an IP conflict is detected.

• Illegal Login: If selected, trigger action when illegal logins are detected.

• Video Exception: If selected, trigger action when an exception such as distorted video is detected.

• Video Output Standard Mismatch: If selected, trigger action when video output standard does not

match.

3. Select the Actions to take when the exception is detected. More than one action can be selected. The actions

available includes:

• Sound Audio Warning: DVR will sound an audio warning if exception is detected.

• Notify Surveillance Center: DVR will notify surveillance center if exception is detected.

• Send Email: DVR will send an email out to the designated recipients if exception is detected.

• Trigger Alarm Output: DVR will trigger alarm output if exception is detected. Selecting this option will

enable the Alarm Output list, where the output to trigger can be selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikvision DS-7208HVI-S Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hikvision DS-7208HVI-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info