Bedienungsanleitung Hikvision DS-7316HQHI-SH (Seite 71 von 198) (Englisch)

629463

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

User Manual of Digital Video Recorder

1) Select the Record tab to configure.

2) Select a camera number in the camera dropdown list.

You can configure the stream type, the resolution, the video quality and other parameters on demand

for Main Stream (Continuous) and Main Stream (Event) respectively.

The Input Resolution of camera connected will be displayed in the live view for 5 seconds when the

camera is connected, or the DVR is powered on. The input resolution includes the resolution and

frame rate of the camera, e.g. 1080P25.

3) You can configure the advantage parameters, including pre-record, post-record time, expired time,

redundant record (this option is only available when the HDD mode is Group) and whether you want

to record audio.

• Pre-record: The time you set to record before the scheduled time or event. For example, when an

alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera

records it at 9:59:55.

• Post-record: The time you set to record after the event or the scheduled time. For example, when

an alarm triggered the recording ends at 11:00, if you set the post-record time as 5 seconds, it

records till 11:00:05.

• Expired Time: The expired time is the longest time for a record file to be kept in the HDD, if the

deadline is reached, the file will be deleted. You can set the expired time to 0, and then the file will

not be deleted. The actual keeping time for the file should be determined by the capacity of the

HDD.

• Redundant Record: The redundant record is to decide whether you want the camera to save the

record files in the redundant HDD. You must configure the redundant HDD in HDD settings. For

detailed information, see Chapter 5.8 Configuring Redundant Recording.

• Record Audio: Check the checkbox of Record Audio to record the sound, otherwise record the

image without sound.

• Video Stream: Main stream and sub-stream are selectable for recording. When you select

sub-stream, you can record for a longer time with the same storage space.

• Enable 960 Mode: The option is supported by analog cameras. Enabling the 960 mode to enable

the WD1 resolution for the main stream, otherwise, the resolution supports up to 4CIF. And the

option does not supported by TVI cameras, while the WD1 resolution is available all the time.

4) Click Apply to save the settings.

5) You can copy the settings to other channels by clicking Copy, if the setting can also be used for other

cameras.

You can copy the same settings to the cameras with same signal, e.g., the channel No. 1-3 connect to the TVI

cameras, and the channel No.4 connects to an analog camera, and then the settings of channel No. 1 can be only

copied to channel 2 and 3.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikvision DS-7316HQHI-SH Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hikvision DS-7316HQHI-SH

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info